Paleo Bill of Materials

River Plant

This set provides the plant related 3D models that go with the river case.

Full Series Downloads

2": rp-50mm.tgz, 3": rp-75mm.tgz, 4": rp-100mm.tgz

Assembly: River Plant Quad Frame

The following frame assembles into the seed quad as shown here.

1 copy is stored in the case, 1 copy is used in a mound on top of the case.

These go in the far left, upper, location. All following assemblies work across the case from left to right.

River Plant Quad Frame

PN: rp011-river-plant-quad-frame-x4

2": rp011-river-plant-quad-frame-x4-50mm.stl

3": rp011-river-plant-quad-frame-x4-75mm.stl

4": rp011-river-plant-quad-frame-x4-100mm.stl

Copies: 4

Add Support in Slicer: required

Filament: Bright Green, AIO

River Plant Quad Frame Support

PN: rp012-river-plant-quad-frame-support-x4

2": rp012-river-plant-quad-frame-support-x4-50mm.stl

3": rp012-river-plant-quad-frame-support-x4-75mm.stl

4": rp012-river-plant-quad-frame-support-x4-100mm.stl

Copies: 4

Add Support in Slicer: required

Filament: Bright Green, AIO

Includes custom support material. This gives a better finish that slicer support alone.

Assembly: River Plant Du Ta

The following parts assemble into the Du Ta as shown here.

2 copies of this assembly are stored in the case.

River Plant Du Ta 1

PN: rp021-river-plant-du-ta-1-x2

2": rp021-river-plant-du-ta-1-x2-50mm.stl

3": rp021-river-plant-du-ta-1-x2-75mm.stl

4": rp021-river-plant-du-ta-1-x2-100mm.stl

Copies: 2

Filament: Bright Green, AIO

River Plant Du Ta 2

PN: rp022-river-plant-du-ta-2-x2

2": rp022-river-plant-du-ta-2-x2-50mm.stl

3": rp022-river-plant-du-ta-2-x2-75mm.stl

4": rp022-river-plant-du-ta-2-x2-100mm.stl

Copies: 2

Filament: Bright Green, AIO

River Plant Du Ta Support 1

PN: rp023-river-plant-du-ta-support-1-x2

2": rp023-river-plant-du-ta-support-1-x2-50mm.stl

3": rp023-river-plant-du-ta-support-1-x2-75mm.stl

4": rp023-river-plant-du-ta-support-1-x2-100mm.stl

Copies: 2

Filament: Bright Green, AIO

This part includes custom support. The finished part is generally better that slicer based support.

River Plant Du Ta Support 2

PN: rp024-river-plant-du-ta-support-2-x2

2": rp024-river-plant-du-ta-support-2-x2-50mm.stl

3": rp024-river-plant-du-ta-support-2-x2-75mm.stl

4": rp024-river-plant-du-ta-support-2-x2-100mm.stl

Copies: 2

Filament: Bright Green, AIO

This part includes custom support. The finished part is generally better that slicer based support.

Assembly: River Plant Du Ta Plant

The following parts assemble into the top of the Du Ta plant as shown here. The middle section is 2 copies of rp085-. The bottom is 1 copy each of rp095- and rp096-.

2 Copies of this assembly are placed atop the case.

River Plant Du Ta Ext 1

PN: rp025-river-plant-du-ta-ext-1-x2

2": rp025-river-plant-du-ta-ext-1-x2-50mm.stl

3": rp025-river-plant-du-ta-ext-1-x2-75mm.stl

4": rp025-river-plant-du-ta-ext-1-x2-100mm.stl

Copies: 2

Filament: Bright Green, AIO

River Plant Du Ta Ext 2

PN: rp026-river-plant-du-ta-ext-2-x2

2": rp026-river-plant-du-ta-ext-2-x2-50mm.stl

3": rp026-river-plant-du-ta-ext-2-x2-75mm.stl

4": rp026-river-plant-du-ta-ext-2-x2-100mm.stl

Copies: 2

Filament: Bright Green, AIO

River Plant Du Ta Ext Support 1

PN: rp027-river-plant-du-ta-ext-support-1-x2

2": rp027-river-plant-du-ta-ext-support-1-x2-50mm.stl

3": rp027-river-plant-du-ta-ext-support-1-x2-75mm.stl

4": rp027-river-plant-du-ta-ext-support-1-x2-100mm.stl

Copies: 2

Filament: Bright Green, AIO

This part includes custom support. The finished part is generally better that slicer based support.

River Plant Du Ta Ext Support 2

PN: rp028-river-plant-du-ta-ext-support-2-x2

2": rp028-river-plant-du-ta-ext-support-2-x2-50mm.stl

3": rp028-river-plant-du-ta-ext-support-2-x2-75mm.stl

4": rp028-river-plant-du-ta-ext-support-2-x2-100mm.stl

Copies: 2

Filament: Bright Green, AIO

This part includes custom support. The finished part is generally better that slicer based support.

Assembly: River Plant Oo Ba

The following parts assemble into the Oo Ba as shown here.

2 copies of this assembly are stored in the case.

River Plant Oo Ba 1

PN: rp031-river-plant-oo-ba-1-x2

2": rp031-river-plant-oo-ba-1-x2-50mm.stl

3": rp031-river-plant-oo-ba-1-x2-75mm.stl

4": rp031-river-plant-oo-ba-1-x2-100mm.stl

Copies: 2

Filament: Bright Green, AIO

River Plant Oo Ba 2

PN: rp032-river-plant-oo-ba-2-x2

2": rp032-river-plant-oo-ba-2-x2-50mm.stl

3": rp032-river-plant-oo-ba-2-x2-75mm.stl

4": rp032-river-plant-oo-ba-2-x2-100mm.stl

Copies: 2

Filament: Bright Green, AIO

River Plant Oo Ba Support 1

PN: rp033-river-plant-oo-ba-support-1-x2

2": rp033-river-plant-oo-ba-support-1-x2-50mm.stl

3": rp033-river-plant-oo-ba-support-1-x2-75mm.stl

4": rp033-river-plant-oo-ba-support-1-x2-100mm.stl

Copies: 2

Filament: Bright Green, AIO

This part includes custom support. The finished part is generally better that slicer based support.

River Plant Oo Ba Support 2

PN: rp034-river-plant-oo-ba-support-2-x2

2": rp034-river-plant-oo-ba-support-2-x2-50mm.stl

3": rp034-river-plant-oo-ba-support-2-x2-75mm.stl

4": rp034-river-plant-oo-ba-support-2-x2-100mm.stl

Copies: 2

Filament: Bright Green, AIO

This part includes custom support. The finished part is generally better that slicer based support.

Assembly: River Plant Oo Ba Plant

The following parts assemble into the top of the Oo Ba plant as shown here. The middle section is 2 copies of rp085-. The bottom is 1 copy each of rp095- and rp096-.

2 Copies of this assembly are placed atop the case.

River Plant Oo Ba Ext 1

PN: rp035-river-plant-oo-ba-ext-1-x2

2": rp035-river-plant-oo-ba-ext-1-x2-50mm.stl

3": rp035-river-plant-oo-ba-ext-1-x2-75mm.stl

4": rp035-river-plant-oo-ba-ext-1-x2-100mm.stl

Copies: 2

Filament: Bright Green, AIO

This part has the joint needed to set this part atop a plant.

River Plant Oo Ba Ext 2

PN: rp036-river-plant-oo-ba-ext-2-x2

2": rp036-river-plant-oo-ba-ext-2-x2-50mm.stl

3": rp036-river-plant-oo-ba-ext-2-x2-75mm.stl

4": rp036-river-plant-oo-ba-ext-2-x2-100mm.stl

Copies: 2

Filament: Bright Green, AIO

This part has the joint needed to set this part atop a plant.

River Plant Oo Ba Ext Support 1

PN: rp037-river-plant-oo-ba-ext-support-1-x2

2": rp037-river-plant-oo-ba-ext-support-1-x2-50mm.stl

3": rp037-river-plant-oo-ba-ext-support-1-x2-75mm.stl

4": rp037-river-plant-oo-ba-ext-support-1-x2-100mm.stl

Copies: 2

Filament: Bright Green, AIO

This part includes custom support. The finished part is generally better that slicer based support.

River Plant Oo Ba Ext Support 2

PN: rp038-river-plant-oo-ba-ext-support-2-x2

2": rp038-river-plant-oo-ba-ext-support-2-x2-50mm.stl

3": rp038-river-plant-oo-ba-ext-support-2-x2-75mm.stl

4": rp038-river-plant-oo-ba-ext-support-2-x2-100mm.stl

Copies: 2

Filament: Bright Green, AIO

This part includes custom support. The finished part is generally better that slicer based support.

Assembly: River Plant The Ne

The following parts assemble into the The Ne as shown here.

2 copies of this assembly are stored in the case.

River Plant The Ne 1

PN: rp041-river-plant-the-ne-1-x2

2": rp041-river-plant-the-ne-1-x2-50mm.stl

3": rp041-river-plant-the-ne-1-x2-75mm.stl

4": rp041-river-plant-the-ne-1-x2-100mm.stl

Copies: 2

Add Support in Slicer: required

Filament: Bright Green, AIO

River Plant The Ne 2

PN: rp042-river-plant-the-ne-2-x2

2": rp042-river-plant-the-ne-2-x2-50mm.stl

3": rp042-river-plant-the-ne-2-x2-75mm.stl

4": rp042-river-plant-the-ne-2-x2-100mm.stl

Copies: 2

Add Support in Slicer: required

Filament: Bright Green, AIO

Assembly: River Plant The Ne Plant

The following parts assemble into the top of the The Ne plant as shown here. The middle section is 2 copies of rp085-. The bottom is 1 copy each of rp095- and rp096-.

2 Copies of this assembly are placed atop the case.

River Plant The Ne Ext 1

PN: rp045-river-plant-the-ne-ext-1-x2

2": rp045-river-plant-the-ne-ext-1-x2-50mm.stl

3": rp045-river-plant-the-ne-ext-1-x2-75mm.stl

4": rp045-river-plant-the-ne-ext-1-x2-100mm.stl

Copies: 2

Add Support in Slicer: required

Filament: Bright Green, AIO

River Plant The Ne Ext 2

PN: rp046-river-plant-the-ne-ext-2-x2

2": rp046-river-plant-the-ne-ext-2-x2-50mm.stl

3": rp046-river-plant-the-ne-ext-2-x2-75mm.stl

4": rp046-river-plant-the-ne-ext-2-x2-100mm.stl

Copies: 2

Add Support in Slicer: required

Filament: Bright Green, AIO

Assembly: River Plant Sha Ha

The following parts assemble into the Sha Ha as shown here.

2 copies of this assembly are stored in the case.

River Plant Sha Ha 1

PN: rp051-river-plant-sha-ha-1-x2

2": rp051-river-plant-sha-ha-1-x2-50mm.stl

3": rp051-river-plant-sha-ha-1-x2-75mm.stl

4": rp051-river-plant-sha-ha-1-x2-100mm.stl

Copies: 2

Add Support in Slicer: required

Filament: Bright Green, AIO

River Plant Sha Ha 2

PN: rp052-river-plant-sha-ha-2-x2

2": rp052-river-plant-sha-ha-2-x2-50mm.stl

3": rp052-river-plant-sha-ha-2-x2-75mm.stl

4": rp052-river-plant-sha-ha-2-x2-100mm.stl

Copies: 2

Add Support in Slicer: required

Filament: Bright Green, AIO

Assembly: River Plant Sha Ha Plant

The following parts assemble into the top of the Sha Ha plant as shown here. The middle section is 2 copies of rp085-. The bottom is 1 copy each of rp095- and rp096-.

2 Copies of this assembly are placed atop the case.

River Plant Sha Ha Ext 1

PN: rp055-river-plant-sha-ha-ext-1-x2

2": rp055-river-plant-sha-ha-ext-1-x2-50mm.stl

3": rp055-river-plant-sha-ha-ext-1-x2-75mm.stl

4": rp055-river-plant-sha-ha-ext-1-x2-100mm.stl

Copies: 2

Add Support in Slicer: required

Filament: Bright Green, AIO

River Plant Sha Ha Ext 2

PN: rp056-river-plant-sha-ha-ext-2-x2

2": rp056-river-plant-sha-ha-ext-2-x2-50mm.stl

3": rp056-river-plant-sha-ha-ext-2-x2-75mm.stl

4": rp056-river-plant-sha-ha-ext-2-x2-100mm.stl

Copies: 2

Add Support in Slicer: required

Filament: Bright Green, AIO

Assembly: River Plant Re Mo

The following parts assemble into the Re Mo as shown here.

2 copies of this assembly are stored in the case.

River Plant Re Mo 1

PN: rp061-river-plant-re-mo-1-x2

2": rp061-river-plant-re-mo-1-x2-50mm.stl

3": rp061-river-plant-re-mo-1-x2-75mm.stl

4": rp061-river-plant-re-mo-1-x2-100mm.stl

Copies: 2

Add Support in Slicer: required

Filament: Bright Green, AIO

River Plant Re Mo 2

PN: rp062-river-plant-re-mo-2-x2

2": rp062-river-plant-re-mo-2-x2-50mm.stl

3": rp062-river-plant-re-mo-2-x2-75mm.stl

4": rp062-river-plant-re-mo-2-x2-100mm.stl

Copies: 2

Add Support in Slicer: required

Filament: Bright Green, AIO

River Plant Re Mo Support 1

PN: rp063-river-plant-re-mo-support-1-x2

2": rp063-river-plant-re-mo-support-1-x2-50mm.stl

3": rp063-river-plant-re-mo-support-1-x2-75mm.stl

4": rp063-river-plant-re-mo-support-1-x2-100mm.stl

Copies: 2

Filament: Bright Green, AIO

Includes custom support material, this often gives better finish than slicer support.

River Plant Re Mo Support 2

PN: rp064-river-plant-re-mo-support-2-x2

2": rp064-river-plant-re-mo-support-2-x2-50mm.stl

3": rp064-river-plant-re-mo-support-2-x2-75mm.stl

4": rp064-river-plant-re-mo-support-2-x2-100mm.stl

Copies: 2

Add Support in Slicer: required

Filament: Bright Green, AIO

Includes custom support material, this often gives better finish than slicer support.

Assembly: River Plant Re Mo Plant

The following parts assemble into the top of the Re Mo plant as shown here. The middle section is 2 copies of rp085-. The bottom is 1 copy each of rp095- and rp096-.

2 Copies of this assembly are placed atop the case.

River Plant Re Mo Ext 1

PN: rp065-river-plant-re-mo-ext-1-x2

2": rp065-river-plant-re-mo-ext-1-x2-50mm.stl

3": rp065-river-plant-re-mo-ext-1-x2-75mm.stl

4": rp065-river-plant-re-mo-ext-1-x2-100mm.stl

Copies: 2

Filament: Bright Green, AIO

River Plant Re Mo Ext 2

PN: rp066-river-plant-re-mo-ext-2-x2

2": rp066-river-plant-re-mo-ext-2-x2-50mm.stl

3": rp066-river-plant-re-mo-ext-2-x2-75mm.stl

4": rp066-river-plant-re-mo-ext-2-x2-100mm.stl

Copies: 2

Add Support in Slicer: required

Filament: Bright Green, AIO

River Plant Re Mo Ext Support 1

PN: rp067-river-plant-re-mo-ext-support-1-x2

2": rp067-river-plant-re-mo-ext-support-1-x2-50mm.stl

3": rp067-river-plant-re-mo-ext-support-1-x2-75mm.stl

4": rp067-river-plant-re-mo-ext-support-1-x2-100mm.stl

Copies: 2

Filament: Bright Green, AIO

Includes custom support material, this often gives better finish than slicer support.

River Plant Re Mo Ext Support 2

PN: rp068-river-plant-re-mo-ext-support-2-x2

2": rp068-river-plant-re-mo-ext-support-2-x2-50mm.stl

3": rp068-river-plant-re-mo-ext-support-2-x2-75mm.stl

4": rp068-river-plant-re-mo-ext-support-2-x2-100mm.stl

Copies: 2

Filament: Bright Green, AIO

Includes custom support material, this often gives better finish than slicer support.

Assembly: River Plant Fe Ge

The following parts assemble into the Fe Ge as shown here.

2 copies of this assembly are stored in the case.

River Plant Fe Ge 1

PN: rp071-river-plant-fe-ge-1-x2

2": rp071-river-plant-fe-ge-1-x2-50mm.stl

3": rp071-river-plant-fe-ge-1-x2-75mm.stl

4": rp071-river-plant-fe-ge-1-x2-100mm.stl

Copies: 2

Filament: Bright Green, AIO

River Plant Fe Ge 2

PN: rp072-river-plant-fe-ge-2-x2

2": rp072-river-plant-fe-ge-2-x2-50mm.stl

3": rp072-river-plant-fe-ge-2-x2-75mm.stl

4": rp072-river-plant-fe-ge-2-x2-100mm.stl

Copies: 2

Filament: Bright Green, AIO

Assembly: River Plant Fe Ge Plant

The following parts assemble into the top of the Fe Ge plant as shown here. The middle section is 2 copies of rp085-. The bottom is 1 copy each of rp095- and rp096-.

2 Copies of this assembly are placed atop the case.

River Plant Fe Ge Ext 1

PN: rp075-river-plant-fe-ge-ext-1-x2

2": rp075-river-plant-fe-ge-ext-1-x2-50mm.stl

3": rp075-river-plant-fe-ge-ext-1-x2-75mm.stl

4": rp075-river-plant-fe-ge-ext-1-x2-100mm.stl

Copies: 2

Filament: Bright Green, AIO

River Plant Fe Ge Ext 2

PN: rp076-river-plant-fe-ge-ext-2-x2

2": rp076-river-plant-fe-ge-ext-2-x2-50mm.stl

3": rp076-river-plant-fe-ge-ext-2-x2-75mm.stl

4": rp076-river-plant-fe-ge-ext-2-x2-100mm.stl

Copies: 2

Filament: Bright Green, AIO

Assembly: River Plant Sa Lu

The following parts assemble into the Sa Lu as shown here.

2 copies of this assembly are stored in the case.

River Plant Sa Lu

PN: rp081-river-plant-sa-lu-x4

2": rp081-river-plant-sa-lu-x4-50mm.stl

3": rp081-river-plant-sa-lu-x4-75mm.stl

4": rp081-river-plant-sa-lu-x4-100mm.stl

Copies: 4

Filament: Bright Green, AIO

These 4 copies make 2 parts stored in the case.

Assembly: River Plant Sa Lu Plant

The following parts assemble into the top of the Sa Lu plant as shown here. The bottom is 1 copy each of rp095- and rp096-.

Note that there is no middle section in this assembly, only a top and bottom.

2 Copies of this assembly are placed atop the case.

River Plant Sa Lu Ext

PN: rp085-river-plant-sa-lu-ext-x4

2": rp085-river-plant-sa-lu-ext-x4-50mm.stl

3": rp085-river-plant-sa-lu-ext-x4-75mm.stl

4": rp085-river-plant-sa-lu-ext-x4-100mm.stl

Copies: 4

Filament: Bright Green, AIO

These 24 copies make 12 parts. Each part sits between a river plant Yo Jo, like rp091-* and some other top.

Assembly: River Plant Yo Jo

The following parts assemble into the Yo Jo as shown here.

2 copies of this assembly are stored in the case.

River Plant Yo Jo 1

PN: rp091-river-plant-yo-jo-1-x2

2": rp091-river-plant-yo-jo-1-x2-50mm.stl

3": rp091-river-plant-yo-jo-1-x2-75mm.stl

4": rp091-river-plant-yo-jo-1-x2-100mm.stl

Copies: 2

Add Support in Slicer: required

Filament: Bright Green, AIO

River Plant Yo Jo 2

PN: rp092-river-plant-yo-jo-2-x2

2": rp092-river-plant-yo-jo-2-x2-50mm.stl

3": rp092-river-plant-yo-jo-2-x2-75mm.stl

4": rp092-river-plant-yo-jo-2-x2-100mm.stl

Copies: 2

Add Support in Slicer: required

Filament: Bright Green, AIO

Assembly: River Plant Yo Jo Plant

The following parts assemble into the top of the Yo Jo plant as shown here.

2 Copies of this assembly are placed atop the case.

River Plant Yo Jo Show 1

PN: rp093-river-plant-yo-jo-show-1-x2

2": rp093-river-plant-yo-jo-show-1-x2-50mm.stl

3": rp093-river-plant-yo-jo-show-1-x2-75mm.stl

4": rp093-river-plant-yo-jo-show-1-x2-100mm.stl

Copies: 2

Filament: Bright Green, AIO

River Plant Yo Jo Show 2

PN: rp094-river-plant-yo-jo-show-2-x2

2": rp094-river-plant-yo-jo-show-2-x2-50mm.stl

3": rp094-river-plant-yo-jo-show-2-x2-75mm.stl

4": rp094-river-plant-yo-jo-show-2-x2-100mm.stl

Copies: 2

Add Support in Slicer: required

Filament: Bright Green, AIO

Assembly: River Plant Yo Jo Extension

The following parts assemble into the bottom of extended plants as shown here.

This is a subassembly, used in other assemblies.

Note the gluing notch at the top of the part.

River Plant Yo Jo Ext 1

PN: rp095-river-plant-yo-jo-ext-1-x2

2": rp095-river-plant-yo-jo-ext-1-x2-50mm.stl

3": rp095-river-plant-yo-jo-ext-1-x2-75mm.stl

4": rp095-river-plant-yo-jo-ext-1-x2-100mm.stl

Copies: 2

Filament: Bright Green, AIO

River Plant Yo Jo Ext 2

PN: rp096-river-plant-yo-jo-ext-2-x2

2": rp096-river-plant-yo-jo-ext-2-x2-50mm.stl

3": rp096-river-plant-yo-jo-ext-2-x2-75mm.stl

4": rp096-river-plant-yo-jo-ext-2-x2-100mm.stl

Copies: 2

Add Support in Slicer: required

Filament: Bright Green, AIO

River Plant Yo Jo Monster

PN: rp097-river-plant-yo-jo-monster

2": rp097-river-plant-yo-jo-monster-50mm.stl

3": rp097-river-plant-yo-jo-monster-75mm.stl

4": rp097-river-plant-yo-jo-monster-100mm.stl

Filament: Bright Green, AIO

This is a single print version of the jo-yo family parts. This is optional, but a fun print.

There are theoretically more prongs on the plant than used in the other models. This model shows off the maximum number that could be printed in all other cases.

Assembly: River Plant Ku Qu

The following parts assemble into the Ku Qu as shown here.

2 copies of this assembly are stored in the case.

2 copies of this assembly are placed atop the case.

River Plant Ku Qu 1

PN: rp101-river-plant-ku-qu-1-x4

2": rp101-river-plant-ku-qu-1-x4-50mm.stl

3": rp101-river-plant-ku-qu-1-x4-75mm.stl

4": rp101-river-plant-ku-qu-1-x4-100mm.stl

Copies: 4

Filament: Bright Green, AIO

River Plant Ku Qu 2

PN: rp102-river-plant-ku-qu-2-x4

2": rp102-river-plant-ku-qu-2-x4-50mm.stl

3": rp102-river-plant-ku-qu-2-x4-75mm.stl

4": rp102-river-plant-ku-qu-2-x4-100mm.stl

Copies: 4

Filament: Bright Green, AIO

Assembly: River Plant Ve Pe

The following parts assemble into the Ve Pe as shown here.

2 copies of this assembly are stored in the case.

2 copies of this assembly are placed atop the case.

River Plant Ve Pe 1

PN: rp111-river-plant-ve-pe-1-x4

2": rp111-river-plant-ve-pe-1-x4-50mm.stl

3": rp111-river-plant-ve-pe-1-x4-75mm.stl

4": rp111-river-plant-ve-pe-1-x4-100mm.stl

Copies: 4

Filament: Bright Green, AIO

River Plant Ve Pe 2

PN: rp112-river-plant-ve-pe-2-x4

2": rp112-river-plant-ve-pe-2-x4-50mm.stl

3": rp112-river-plant-ve-pe-2-x4-75mm.stl

4": rp112-river-plant-ve-pe-2-x4-100mm.stl

Copies: 4

Filament: Bright Green, AIO

Assembly: River Plant Root

The following parts assemble into the Root as shown here.

2 copies of this assembly are placed atop the case.

River Plant Wa Ze Root Simple

PN: rp121-river-plant-wa-ze-root-simple-x4

2": rp121-river-plant-wa-ze-root-simple-x4-50mm.stl

3": rp121-river-plant-wa-ze-root-simple-x4-75mm.stl

4": rp121-river-plant-wa-ze-root-simple-x4-100mm.stl

Copies: 4

Filament: Bright Green, AIO

River Plant Wa Ze Root Brace

PN: rp122-river-plant-wa-ze-root-brace-x2

2": rp122-river-plant-wa-ze-root-brace-x2-50mm.stl

3": rp122-river-plant-wa-ze-root-brace-x2-75mm.stl

4": rp122-river-plant-wa-ze-root-brace-x2-100mm.stl

Copies: 2

Filament: Brown, AMZ3D

Assembly: River Plant Wa Ze

The following parts assemble into the Wa Ze as shown here.

2 copies of this assembly are placed inside the case.

Use the rp129 jig to hold the parts in place while building these assemblies.

This is by far the hardest assembly to build within the entire set.

River Plant Wa Ze Root 1

PN: rp123-river-plant-wa-ze-root-1-x2

2": rp123-river-plant-wa-ze-root-1-x2-50mm.stl

3": rp123-river-plant-wa-ze-root-1-x2-75mm.stl

4": rp123-river-plant-wa-ze-root-1-x2-100mm.stl

Copies: 2

Filament: Bright Green, AIO

River Plant Wa Ze Root 2

PN: rp124-river-plant-wa-ze-root-2-x2

2": rp124-river-plant-wa-ze-root-2-x2-50mm.stl

3": rp124-river-plant-wa-ze-root-2-x2-75mm.stl

4": rp124-river-plant-wa-ze-root-2-x2-100mm.stl

Copies: 2

Filament: Bright Green, AIO

River Plant Wa Ze Rim 1

PN: rp125-river-plant-wa-ze-rim-1-x4

2": rp125-river-plant-wa-ze-rim-1-x4-50mm.stl

3": rp125-river-plant-wa-ze-rim-1-x4-75mm.stl

4": rp125-river-plant-wa-ze-rim-1-x4-100mm.stl

Copies: 4

Add Support in Slicer: required

Filament: Bright Green, AIO

River Plant Wa Ze Rim 2

PN: rp126-river-plant-wa-ze-rim-2-x4

2": rp126-river-plant-wa-ze-rim-2-x4-50mm.stl

3": rp126-river-plant-wa-ze-rim-2-x4-75mm.stl

4": rp126-river-plant-wa-ze-rim-2-x4-100mm.stl

Copies: 4

Filament: Bright Green, AIO

River Plant Wa Ze Peg 1

PN: rp127-river-plant-wa-ze-peg-1-x2

2": rp127-river-plant-wa-ze-peg-1-x2-50mm.stl

3": rp127-river-plant-wa-ze-peg-1-x2-75mm.stl

4": rp127-river-plant-wa-ze-peg-1-x2-100mm.stl

Copies: 2

Filament: Clear, IC3D

River Plant Wa Ze Peg 2

PN: rp128-river-plant-wa-ze-peg-2-x2

2": rp128-river-plant-wa-ze-peg-2-x2-50mm.stl

3": rp128-river-plant-wa-ze-peg-2-x2-75mm.stl

4": rp128-river-plant-wa-ze-peg-2-x2-100mm.stl

Copies: 2

Filament: Clear, IC3D

River Plant Wa Ze Jig

PN: rp129-river-plant-wa-ze-jig

2": rp129-river-plant-wa-ze-jig-50mm.stl

3": rp129-river-plant-wa-ze-jig-75mm.stl

4": rp129-river-plant-wa-ze-jig-100mm.stl

Filament: Use any scrap filament

This optional part can be used to hold the various wa-ze related parts in position for threading.

Assembly: River Plant Dot Colon

The following parts assemble into the Dot Colon as shown here.

2 copies of this assembly are stored in the case.

2 copies of this assembly are placed atop the case.

Note shown here with 4 monofilament lines and using rp164 as the center seed.

This is easier to assemble if only 2 lines are used, rp162 is available for the central seed in this scenario.

Still easier is a single monofilament line with rp161 as the center seed. This scenario, though, does not automatically center the seed.

River Plant Dot Colon Frame

PN: rp131-river-plant-dot-colon-frame-x8

2": rp131-river-plant-dot-colon-frame-x8-50mm.stl

3": rp131-river-plant-dot-colon-frame-x8-75mm.stl

4": rp131-river-plant-dot-colon-frame-x8-100mm.stl

Copies: 8

Add Support in Slicer: required

Filament: Clear, IC3D

River Plant Dot Colon Frame Support

PN: rp132-river-plant-dot-colon-frame-support-x8

2": rp132-river-plant-dot-colon-frame-support-x8-50mm.stl

3": rp132-river-plant-dot-colon-frame-support-x8-75mm.stl

4": rp132-river-plant-dot-colon-frame-support-x8-100mm.stl

Copies: 8

Add Support in Slicer: required

Filament: Clear, IC3D

Includes custom support material. This gives a better finish that slicer support alone.

River Plant Seed1

PN: rp161-river-plant-seed1-x114

2": rp161-river-plant-seed1-x114-50mm.stl

3": rp161-river-plant-seed1-x114-75mm.stl

4": rp161-river-plant-seed1-x114-100mm.stl

Copies: 114

Filament: Bright Green, AIO

These seeds have a single hole for a single monofilament line.

River Plant Seed2

PN: rp162-river-plant-seed2

2": rp162-river-plant-seed2-50mm.stl

3": rp162-river-plant-seed2-75mm.stl

4": rp162-river-plant-seed2-100mm.stl

Filament: Bright Green, AIO

Holes for 2 monofilament lines.

This is an optional, easier to assemble, center for rp131.

River Plant Seed4

PN: rp164-river-plant-seed4-x12

2": rp164-river-plant-seed4-x12-50mm.stl

3": rp164-river-plant-seed4-x12-75mm.stl

4": rp164-river-plant-seed4-x12-100mm.stl

Copies: 12

Filament: Bright Green, AIO

Holes for 4 monofilament lines.

River Plant Base 1

PN: rp901-river-plant-base-1

2": rp901-river-plant-base-1-50mm.stl

3": rp901-river-plant-base-1-75mm.stl

4": rp901-river-plant-base-1-100mm.stl

Filament: Clear, IC3D

This is an optional base that holds rp011 or rp131.

River Plant Base 2

PN: rp902-river-plant-base-2

2": rp902-river-plant-base-2-50mm.stl

3": rp902-river-plant-base-2-75mm.stl

4": rp902-river-plant-base-2-100mm.stl

Filament: Clear, IC3D

This is an optional base that holds a single copy of a plant.

Stats

Part Numbers: 49

Part Count: 268

Optional Part Numbers: 19

Optional Part Count: 41