Paleo Bill of Materials

River Case

This series provides the River Case. This is the largest case in the set, about 1/2 again larger than the next nearest case. This is a big project.

Most of the assemblies shown below are for 1/4 of the case. This to make the artwork easier to see. The case, though, is assembled into 1 very long case.

Full Series Downloads

2": rc-50mm.tgz, 3": rc-75mm.tgz, 4": rc-100mm.tgz

Assembly: River Case Bottom, part 1

The following 11 parts, plus trim, assemble into the far left side of the bottom, as shown here.

This is only the start of the bottom.

River Case Bottom 1

PN: rc001-river-case-bottom-1

2": rc001-river-case-bottom-1-50mm.stl

3": rc001-river-case-bottom-1-75mm.stl

4": rc001-river-case-bottom-1-100mm.stl

Filament: Brown, AMZ3D

River Case Bottom 2

PN: rc002-river-case-bottom-2

2": rc002-river-case-bottom-2-50mm.stl

3": rc002-river-case-bottom-2-75mm.stl

4": rc002-river-case-bottom-2-100mm.stl

Filament: Brown, AMZ3D

River Case Bottom 5

PN: rc005-river-case-bottom-5

2": rc005-river-case-bottom-5-50mm.stl

3": rc005-river-case-bottom-5-75mm.stl

4": rc005-river-case-bottom-5-100mm.stl

Filament: Brown, AMZ3D

River Case Bottom 6

PN: rc006-river-case-bottom-6

2": rc006-river-case-bottom-6-50mm.stl

3": rc006-river-case-bottom-6-75mm.stl

4": rc006-river-case-bottom-6-100mm.stl

Filament: Brown, AMZ3D

River Case Bottom 7

PN: rc007-river-case-bottom-7

2": rc007-river-case-bottom-7-50mm.stl

3": rc007-river-case-bottom-7-75mm.stl

4": rc007-river-case-bottom-7-100mm.stl

Filament: Brown, AMZ3D

River Case Bottom 9

PN: rc009-river-case-bottom-9

2": rc009-river-case-bottom-9-50mm.stl

3": rc009-river-case-bottom-9-75mm.stl

4": rc009-river-case-bottom-9-100mm.stl

Filament: Brown, AMZ3D

River Case Bottom 10

PN: rc010-river-case-bottom-10

2": rc010-river-case-bottom-10-50mm.stl

3": rc010-river-case-bottom-10-75mm.stl

4": rc010-river-case-bottom-10-100mm.stl

Filament: Brown, AMZ3D

River Case Bottom 11

PN: rc011-river-case-bottom-11

2": rc011-river-case-bottom-11-50mm.stl

3": rc011-river-case-bottom-11-75mm.stl

4": rc011-river-case-bottom-11-100mm.stl

Filament: Brown, AMZ3D

River Case Bottom 13

PN: rc013-river-case-bottom-13

2": rc013-river-case-bottom-13-50mm.stl

3": rc013-river-case-bottom-13-75mm.stl

4": rc013-river-case-bottom-13-100mm.stl

Filament: Brown, AMZ3D

River Case Bottom 14

PN: rc014-river-case-bottom-14

2": rc014-river-case-bottom-14-50mm.stl

3": rc014-river-case-bottom-14-75mm.stl

4": rc014-river-case-bottom-14-100mm.stl

Filament: Brown, AMZ3D

River Case Bottom 15

PN: rc015-river-case-bottom-15

2": rc015-river-case-bottom-15-50mm.stl

3": rc015-river-case-bottom-15-75mm.stl

4": rc015-river-case-bottom-15-100mm.stl

Filament: Brown, AMZ3D

Assembly: River Case Bottom, part 2

The following 9 parts, plus trim, assemble into the middle left side of the bottom, as shown here.

River Case Bottom 17

PN: rc017-river-case-bottom-17

2": rc017-river-case-bottom-17-50mm.stl

3": rc017-river-case-bottom-17-75mm.stl

4": rc017-river-case-bottom-17-100mm.stl

Filament: Brown, AMZ3D

River Case Bottom 18

PN: rc018-river-case-bottom-18

2": rc018-river-case-bottom-18-50mm.stl

3": rc018-river-case-bottom-18-75mm.stl

4": rc018-river-case-bottom-18-100mm.stl

Filament: Brown, AMZ3D

River Case Bottom 19

PN: rc019-river-case-bottom-19

2": rc019-river-case-bottom-19-50mm.stl

3": rc019-river-case-bottom-19-75mm.stl

4": rc019-river-case-bottom-19-100mm.stl

Filament: Brown, AMZ3D

River Case Bottom 21

PN: rc021-river-case-bottom-21

2": rc021-river-case-bottom-21-50mm.stl

3": rc021-river-case-bottom-21-75mm.stl

4": rc021-river-case-bottom-21-100mm.stl

Filament: Brown, AMZ3D

River Case Bottom 22

PN: rc022-river-case-bottom-22

2": rc022-river-case-bottom-22-50mm.stl

3": rc022-river-case-bottom-22-75mm.stl

4": rc022-river-case-bottom-22-100mm.stl

Filament: Brown, AMZ3D

River Case Bottom 23

PN: rc023-river-case-bottom-23

2": rc023-river-case-bottom-23-50mm.stl

3": rc023-river-case-bottom-23-75mm.stl

4": rc023-river-case-bottom-23-100mm.stl

Filament: Brown, AMZ3D

River Case Bottom 25

PN: rc025-river-case-bottom-25

2": rc025-river-case-bottom-25-50mm.stl

3": rc025-river-case-bottom-25-75mm.stl

4": rc025-river-case-bottom-25-100mm.stl

Filament: Brown, AMZ3D

River Case Bottom 26

PN: rc026-river-case-bottom-26

2": rc026-river-case-bottom-26-50mm.stl

3": rc026-river-case-bottom-26-75mm.stl

4": rc026-river-case-bottom-26-100mm.stl

Filament: Brown, AMZ3D

River Case Bottom 27

PN: rc027-river-case-bottom-27

2": rc027-river-case-bottom-27-50mm.stl

3": rc027-river-case-bottom-27-75mm.stl

4": rc027-river-case-bottom-27-100mm.stl

Filament: Brown, AMZ3D

Assembly: River Case Bottom, part 3

The following 9 parts, plus trim, assemble into the middle right side of the bottom, as shown here.

River Case Bottom 29

PN: rc029-river-case-bottom-29

2": rc029-river-case-bottom-29-50mm.stl

3": rc029-river-case-bottom-29-75mm.stl

4": rc029-river-case-bottom-29-100mm.stl

Filament: Brown, AMZ3D

River Case Bottom 30

PN: rc030-river-case-bottom-30

2": rc030-river-case-bottom-30-50mm.stl

3": rc030-river-case-bottom-30-75mm.stl

4": rc030-river-case-bottom-30-100mm.stl

Filament: Brown, AMZ3D

River Case Bottom 31

PN: rc031-river-case-bottom-31

2": rc031-river-case-bottom-31-50mm.stl

3": rc031-river-case-bottom-31-75mm.stl

4": rc031-river-case-bottom-31-100mm.stl

Filament: Brown, AMZ3D

River Case Bottom 33

PN: rc033-river-case-bottom-33

2": rc033-river-case-bottom-33-50mm.stl

3": rc033-river-case-bottom-33-75mm.stl

4": rc033-river-case-bottom-33-100mm.stl

Filament: Brown, AMZ3D

River Case Bottom 34

PN: rc034-river-case-bottom-34

2": rc034-river-case-bottom-34-50mm.stl

3": rc034-river-case-bottom-34-75mm.stl

4": rc034-river-case-bottom-34-100mm.stl

Filament: Brown, AMZ3D

River Case Bottom 35

PN: rc035-river-case-bottom-35

2": rc035-river-case-bottom-35-50mm.stl

3": rc035-river-case-bottom-35-75mm.stl

4": rc035-river-case-bottom-35-100mm.stl

Filament: Brown, AMZ3D

River Case Bottom 37

PN: rc037-river-case-bottom-37

2": rc037-river-case-bottom-37-50mm.stl

3": rc037-river-case-bottom-37-75mm.stl

4": rc037-river-case-bottom-37-100mm.stl

Filament: Brown, AMZ3D

River Case Bottom 38

PN: rc038-river-case-bottom-38

2": rc038-river-case-bottom-38-50mm.stl

3": rc038-river-case-bottom-38-75mm.stl

4": rc038-river-case-bottom-38-100mm.stl

Filament: Brown, AMZ3D

River Case Bottom 39

PN: rc039-river-case-bottom-39

2": rc039-river-case-bottom-39-50mm.stl

3": rc039-river-case-bottom-39-75mm.stl

4": rc039-river-case-bottom-39-100mm.stl

Filament: Brown, AMZ3D

Assembly: River Case Bottom, part 4

The following 9 parts, plus trim, assemble into the far right side of the bottom, as shown here.

River Case Bottom 41

PN: rc041-river-case-bottom-41

2": rc041-river-case-bottom-41-50mm.stl

3": rc041-river-case-bottom-41-75mm.stl

4": rc041-river-case-bottom-41-100mm.stl

Filament: Brown, AMZ3D

River Case Bottom 42

PN: rc042-river-case-bottom-42

2": rc042-river-case-bottom-42-50mm.stl

3": rc042-river-case-bottom-42-75mm.stl

4": rc042-river-case-bottom-42-100mm.stl

Filament: Brown, AMZ3D

River Case Bottom 43

PN: rc043-river-case-bottom-43

2": rc043-river-case-bottom-43-50mm.stl

3": rc043-river-case-bottom-43-75mm.stl

4": rc043-river-case-bottom-43-100mm.stl

Filament: Brown, AMZ3D

River Case Bottom 45

PN: rc045-river-case-bottom-45

2": rc045-river-case-bottom-45-50mm.stl

3": rc045-river-case-bottom-45-75mm.stl

4": rc045-river-case-bottom-45-100mm.stl

Filament: Brown, AMZ3D

River Case Bottom 46

PN: rc046-river-case-bottom-46

2": rc046-river-case-bottom-46-50mm.stl

3": rc046-river-case-bottom-46-75mm.stl

4": rc046-river-case-bottom-46-100mm.stl

Filament: Brown, AMZ3D

River Case Bottom 47

PN: rc047-river-case-bottom-47

2": rc047-river-case-bottom-47-50mm.stl

3": rc047-river-case-bottom-47-75mm.stl

4": rc047-river-case-bottom-47-100mm.stl

Filament: Brown, AMZ3D

River Case Bottom 49

PN: rc049-river-case-bottom-49

2": rc049-river-case-bottom-49-50mm.stl

3": rc049-river-case-bottom-49-75mm.stl

4": rc049-river-case-bottom-49-100mm.stl

Filament: Brown, AMZ3D

River Case Bottom 50

PN: rc050-river-case-bottom-50

2": rc050-river-case-bottom-50-50mm.stl

3": rc050-river-case-bottom-50-75mm.stl

4": rc050-river-case-bottom-50-100mm.stl

Filament: Brown, AMZ3D

River Case Bottom 51

PN: rc051-river-case-bottom-51

2": rc051-river-case-bottom-51-50mm.stl

3": rc051-river-case-bottom-51-75mm.stl

4": rc051-river-case-bottom-51-100mm.stl

Filament: Brown, AMZ3D

River Case Bottom Trim Side

PN: rc091-river-case-bottom-trim-side-x22

2": rc091-river-case-bottom-trim-side-x22-50mm.stl

3": rc091-river-case-bottom-trim-side-x22-75mm.stl

4": rc091-river-case-bottom-trim-side-x22-100mm.stl

Copies: 22

Filament: Brown, AMZ3D

River Case Bottom Trim Corner

PN: rc092-river-case-bottom-trim-corner-x3

2": rc092-river-case-bottom-trim-corner-x3-50mm.stl

3": rc092-river-case-bottom-trim-corner-x3-75mm.stl

4": rc092-river-case-bottom-trim-corner-x3-100mm.stl

Copies: 3

Filament: Brown, AMZ3D

River Case Bottom Trim Corner Short 1

PN: rc093-river-case-bottom-trim-corner-short-1

2": rc093-river-case-bottom-trim-corner-short-1-50mm.stl

3": rc093-river-case-bottom-trim-corner-short-1-75mm.stl

4": rc093-river-case-bottom-trim-corner-short-1-100mm.stl

Copies: 6

Filament: Brown, AMZ3D

River Case Bottom Trim Corner Short 2

PN: rc094-river-case-bottom-trim-corner-short-2

2": rc094-river-case-bottom-trim-corner-short-2-50mm.stl

3": rc094-river-case-bottom-trim-corner-short-2-75mm.stl

4": rc094-river-case-bottom-trim-corner-short-2-100mm.stl

Copies: 6

Filament: Brown, AMZ3D

Assembly: River Case Sides, part 1

The following 15 side parts assemble into the far left side of the case, as shown here.

River Case Side 1

PN: rc101-river-case-side-1

2": rc101-river-case-side-1-50mm.stl

3": rc101-river-case-side-1-75mm.stl

4": rc101-river-case-side-1-100mm.stl

Filament: Brown, AMZ3D

River Case Side 2

PN: rc102-river-case-side-2

2": rc102-river-case-side-2-50mm.stl

3": rc102-river-case-side-2-75mm.stl

4": rc102-river-case-side-2-100mm.stl

Filament: Brown, AMZ3D

River Case Side 3

PN: rc103-river-case-side-3

2": rc103-river-case-side-3-50mm.stl

3": rc103-river-case-side-3-75mm.stl

4": rc103-river-case-side-3-100mm.stl

Filament: Brown, AMZ3D

River Case Side 5

PN: rc105-river-case-side-5

2": rc105-river-case-side-5-50mm.stl

3": rc105-river-case-side-5-75mm.stl

4": rc105-river-case-side-5-100mm.stl

Filament: Brown, AMZ3D

River Case Side 6

PN: rc106-river-case-side-6

2": rc106-river-case-side-6-50mm.stl

3": rc106-river-case-side-6-75mm.stl

4": rc106-river-case-side-6-100mm.stl

Filament: Brown, AMZ3D

River Case Side 7

PN: rc107-river-case-side-7

2": rc107-river-case-side-7-50mm.stl

3": rc107-river-case-side-7-75mm.stl

4": rc107-river-case-side-7-100mm.stl

Filament: Brown, AMZ3D

River Case Side 8

PN: rc108-river-case-side-8

2": rc108-river-case-side-8-50mm.stl

3": rc108-river-case-side-8-75mm.stl

4": rc108-river-case-side-8-100mm.stl

Filament: Brown, AMZ3D

River Case Side 9

PN: rc109-river-case-side-9

2": rc109-river-case-side-9-50mm.stl

3": rc109-river-case-side-9-75mm.stl

4": rc109-river-case-side-9-100mm.stl

Filament: Brown, AMZ3D

River Case Side 10

PN: rc110-river-case-side-10

2": rc110-river-case-side-10-50mm.stl

3": rc110-river-case-side-10-75mm.stl

4": rc110-river-case-side-10-100mm.stl

Filament: Brown, AMZ3D

River Case Side 11

PN: rc111-river-case-side-11

2": rc111-river-case-side-11-50mm.stl

3": rc111-river-case-side-11-75mm.stl

4": rc111-river-case-side-11-100mm.stl

Filament: Brown, AMZ3D

River Case Side 12

PN: rc112-river-case-side-12

2": rc112-river-case-side-12-50mm.stl

3": rc112-river-case-side-12-75mm.stl

4": rc112-river-case-side-12-100mm.stl

Filament: Brown, AMZ3D

River Case Side 13

PN: rc113-river-case-side-13

2": rc113-river-case-side-13-50mm.stl

3": rc113-river-case-side-13-75mm.stl

4": rc113-river-case-side-13-100mm.stl

Filament: Brown, AMZ3D

River Case Side 14

PN: rc114-river-case-side-14

2": rc114-river-case-side-14-50mm.stl

3": rc114-river-case-side-14-75mm.stl

4": rc114-river-case-side-14-100mm.stl

Filament: Brown, AMZ3D

River Case Side 15

PN: rc115-river-case-side-15

2": rc115-river-case-side-15-50mm.stl

3": rc115-river-case-side-15-75mm.stl

4": rc115-river-case-side-15-100mm.stl

Filament: Brown, AMZ3D

River Case Side 16

PN: rc116-river-case-side-16

2": rc116-river-case-side-16-50mm.stl

3": rc116-river-case-side-16-75mm.stl

4": rc116-river-case-side-16-100mm.stl

Filament: Brown, AMZ3D

Assembly: River Case Sides, part 2

The following 12 side parts assemble into the middle left side of the case, as shown here.

River Case Side 17

PN: rc117-river-case-side-17

2": rc117-river-case-side-17-50mm.stl

3": rc117-river-case-side-17-75mm.stl

4": rc117-river-case-side-17-100mm.stl

Filament: Brown, AMZ3D

River Case Side 18

PN: rc118-river-case-side-18

2": rc118-river-case-side-18-50mm.stl

3": rc118-river-case-side-18-75mm.stl

4": rc118-river-case-side-18-100mm.stl

Filament: Brown, AMZ3D

River Case Side 19

PN: rc119-river-case-side-19

2": rc119-river-case-side-19-50mm.stl

3": rc119-river-case-side-19-75mm.stl

4": rc119-river-case-side-19-100mm.stl

Filament: Brown, AMZ3D

River Case Side 20

PN: rc120-river-case-side-20

2": rc120-river-case-side-20-50mm.stl

3": rc120-river-case-side-20-75mm.stl

4": rc120-river-case-side-20-100mm.stl

Filament: Brown, AMZ3D

River Case Side 21

PN: rc121-river-case-side-21

2": rc121-river-case-side-21-50mm.stl

3": rc121-river-case-side-21-75mm.stl

4": rc121-river-case-side-21-100mm.stl

Filament: Brown, AMZ3D

River Case Side 22

PN: rc122-river-case-side-22

2": rc122-river-case-side-22-50mm.stl

3": rc122-river-case-side-22-75mm.stl

4": rc122-river-case-side-22-100mm.stl

Filament: Brown, AMZ3D

River Case Side 23

PN: rc123-river-case-side-23

2": rc123-river-case-side-23-50mm.stl

3": rc123-river-case-side-23-75mm.stl

4": rc123-river-case-side-23-100mm.stl

Filament: Brown, AMZ3D

River Case Side 24

PN: rc124-river-case-side-24

2": rc124-river-case-side-24-50mm.stl

3": rc124-river-case-side-24-75mm.stl

4": rc124-river-case-side-24-100mm.stl

Filament: Brown, AMZ3D

River Case Side 25

PN: rc125-river-case-side-25

2": rc125-river-case-side-25-50mm.stl

3": rc125-river-case-side-25-75mm.stl

4": rc125-river-case-side-25-100mm.stl

Filament: Brown, AMZ3D

River Case Side 26

PN: rc126-river-case-side-26

2": rc126-river-case-side-26-50mm.stl

3": rc126-river-case-side-26-75mm.stl

4": rc126-river-case-side-26-100mm.stl

Filament: Brown, AMZ3D

River Case Side 27

PN: rc127-river-case-side-27

2": rc127-river-case-side-27-50mm.stl

3": rc127-river-case-side-27-75mm.stl

4": rc127-river-case-side-27-100mm.stl

Filament: Brown, AMZ3D

River Case Side 28

PN: rc128-river-case-side-28

2": rc128-river-case-side-28-50mm.stl

3": rc128-river-case-side-28-75mm.stl

4": rc128-river-case-side-28-100mm.stl

Filament: Brown, AMZ3D

Assembly: River Case Sides, part 3

The following 16 side parts assemble into the middle right side of the case, as shown here.

River Case Side 29

PN: rc129-river-case-side-29

2": rc129-river-case-side-29-50mm.stl

3": rc129-river-case-side-29-75mm.stl

4": rc129-river-case-side-29-100mm.stl

Filament: Brown, AMZ3D

River Case Side 30

PN: rc130-river-case-side-30

2": rc130-river-case-side-30-50mm.stl

3": rc130-river-case-side-30-75mm.stl

4": rc130-river-case-side-30-100mm.stl

Filament: Brown, AMZ3D

River Case Side 31

PN: rc131-river-case-side-31

2": rc131-river-case-side-31-50mm.stl

3": rc131-river-case-side-31-75mm.stl

4": rc131-river-case-side-31-100mm.stl

Filament: Brown, AMZ3D

River Case Side 32

PN: rc132-river-case-side-32

2": rc132-river-case-side-32-50mm.stl

3": rc132-river-case-side-32-75mm.stl

4": rc132-river-case-side-32-100mm.stl

Filament: Brown, AMZ3D

River Case Side 33

PN: rc133-river-case-side-33

2": rc133-river-case-side-33-50mm.stl

3": rc133-river-case-side-33-75mm.stl

4": rc133-river-case-side-33-100mm.stl

Filament: Brown, AMZ3D

River Case Side 34

PN: rc134-river-case-side-34

2": rc134-river-case-side-34-50mm.stl

3": rc134-river-case-side-34-75mm.stl

4": rc134-river-case-side-34-100mm.stl

Filament: Brown, AMZ3D

River Case Side 35

PN: rc135-river-case-side-35

2": rc135-river-case-side-35-50mm.stl

3": rc135-river-case-side-35-75mm.stl

4": rc135-river-case-side-35-100mm.stl

Filament: Brown, AMZ3D

River Case Side 36

PN: rc136-river-case-side-36

2": rc136-river-case-side-36-50mm.stl

3": rc136-river-case-side-36-75mm.stl

4": rc136-river-case-side-36-100mm.stl

Filament: Brown, AMZ3D

River Case Side 37

PN: rc137-river-case-side-37

2": rc137-river-case-side-37-50mm.stl

3": rc137-river-case-side-37-75mm.stl

4": rc137-river-case-side-37-100mm.stl

Filament: Brown, AMZ3D

River Case Side 38

PN: rc138-river-case-side-38

2": rc138-river-case-side-38-50mm.stl

3": rc138-river-case-side-38-75mm.stl

4": rc138-river-case-side-38-100mm.stl

Filament: Brown, AMZ3D

River Case Side 39

PN: rc139-river-case-side-39

2": rc139-river-case-side-39-50mm.stl

3": rc139-river-case-side-39-75mm.stl

4": rc139-river-case-side-39-100mm.stl

Filament: Brown, AMZ3D

River Case Side 40

PN: rc140-river-case-side-40

2": rc140-river-case-side-40-50mm.stl

3": rc140-river-case-side-40-75mm.stl

4": rc140-river-case-side-40-100mm.stl

Filament: Brown, AMZ3D

River Case Side 41

PN: rc141-river-case-side-41

2": rc141-river-case-side-41-50mm.stl

3": rc141-river-case-side-41-75mm.stl

4": rc141-river-case-side-41-100mm.stl

Filament: Brown, AMZ3D

River Case Side 42

PN: rc142-river-case-side-42

2": rc142-river-case-side-42-50mm.stl

3": rc142-river-case-side-42-75mm.stl

4": rc142-river-case-side-42-100mm.stl

Filament: Brown, AMZ3D

River Case Side 43

PN: rc143-river-case-side-43

2": rc143-river-case-side-43-50mm.stl

3": rc143-river-case-side-43-75mm.stl

4": rc143-river-case-side-43-100mm.stl

Filament: Brown, AMZ3D

River Case Side 44

PN: rc144-river-case-side-44

2": rc144-river-case-side-44-50mm.stl

3": rc144-river-case-side-44-75mm.stl

4": rc144-river-case-side-44-100mm.stl

Filament: Brown, AMZ3D

Assembly: River Case Sides, part 4

The following 12 side parts assemble into the far right side of the case, as shown here.

River Case Side 45

PN: rc145-river-case-side-45

2": rc145-river-case-side-45-50mm.stl

3": rc145-river-case-side-45-75mm.stl

4": rc145-river-case-side-45-100mm.stl

Filament: Brown, AMZ3D

River Case Side 46

PN: rc146-river-case-side-46

2": rc146-river-case-side-46-50mm.stl

3": rc146-river-case-side-46-75mm.stl

4": rc146-river-case-side-46-100mm.stl

Filament: Brown, AMZ3D

River Case Side 47

PN: rc147-river-case-side-47

2": rc147-river-case-side-47-50mm.stl

3": rc147-river-case-side-47-75mm.stl

4": rc147-river-case-side-47-100mm.stl

Filament: Brown, AMZ3D

River Case Side 48

PN: rc148-river-case-side-48

2": rc148-river-case-side-48-50mm.stl

3": rc148-river-case-side-48-75mm.stl

4": rc148-river-case-side-48-100mm.stl

Filament: Brown, AMZ3D

River Case Side 49

PN: rc149-river-case-side-49

2": rc149-river-case-side-49-50mm.stl

3": rc149-river-case-side-49-75mm.stl

4": rc149-river-case-side-49-100mm.stl

Filament: Brown, AMZ3D

River Case Side 50

PN: rc150-river-case-side-50

2": rc150-river-case-side-50-50mm.stl

3": rc150-river-case-side-50-75mm.stl

4": rc150-river-case-side-50-100mm.stl

Filament: Brown, AMZ3D

River Case Side 51

PN: rc151-river-case-side-51

2": rc151-river-case-side-51-50mm.stl

3": rc151-river-case-side-51-75mm.stl

4": rc151-river-case-side-51-100mm.stl

Filament: Brown, AMZ3D

River Case Side 52

PN: rc152-river-case-side-52

2": rc152-river-case-side-52-50mm.stl

3": rc152-river-case-side-52-75mm.stl

4": rc152-river-case-side-52-100mm.stl

Filament: Brown, AMZ3D

River Case Side 53

PN: rc153-river-case-side-53

2": rc153-river-case-side-53-50mm.stl

3": rc153-river-case-side-53-75mm.stl

4": rc153-river-case-side-53-100mm.stl

Filament: Brown, AMZ3D

River Case Side 54

PN: rc154-river-case-side-54

2": rc154-river-case-side-54-50mm.stl

3": rc154-river-case-side-54-75mm.stl

4": rc154-river-case-side-54-100mm.stl

Filament: Brown, AMZ3D

River Case Side 55

PN: rc155-river-case-side-55

2": rc155-river-case-side-55-50mm.stl

3": rc155-river-case-side-55-75mm.stl

4": rc155-river-case-side-55-100mm.stl

Filament: Brown, AMZ3D

River Case Side 56

PN: rc156-river-case-side-56

2": rc156-river-case-side-56-50mm.stl

3": rc156-river-case-side-56-75mm.stl

4": rc156-river-case-side-56-100mm.stl

Filament: Brown, AMZ3D

River Case Brace Outside Blank

PN: rc190-river-case-brace-outside-blank-x17

2": rc190-river-case-brace-outside-blank-x17-50mm.stl

3": rc190-river-case-brace-outside-blank-x17-75mm.stl

4": rc190-river-case-brace-outside-blank-x17-100mm.stl

Copies: 17

Filament: Brown, AMZ3D

River Case Brace Outside Narrow

PN: rc191-river-case-brace-outside-narrow-x4

2": rc191-river-case-brace-outside-narrow-x4-50mm.stl

3": rc191-river-case-brace-outside-narrow-x4-75mm.stl

4": rc191-river-case-brace-outside-narrow-x4-100mm.stl

Copies: 4

Filament: Brown, AMZ3D

River Case Brace Outside Wide

PN: rc192-river-case-brace-outside-wide-x11

2": rc192-river-case-brace-outside-wide-x11-50mm.stl

3": rc192-river-case-brace-outside-wide-x11-75mm.stl

4": rc192-river-case-brace-outside-wide-x11-100mm.stl

Copies: 11

Filament: Brown, AMZ3D

River Case Brace Inside Blank

PN: rc195-river-case-brace-inside-blank-x12

2": rc195-river-case-brace-inside-blank-x12-50mm.stl

3": rc195-river-case-brace-inside-blank-x12-75mm.stl

4": rc195-river-case-brace-inside-blank-x12-100mm.stl

Copies: 12

Filament: Brown, AMZ3D

River Case Brace Inside Narrow

PN: rc196-river-case-brace-inside-narrow-x15

2": rc196-river-case-brace-inside-narrow-x15-50mm.stl

3": rc196-river-case-brace-inside-narrow-x15-75mm.stl

4": rc196-river-case-brace-inside-narrow-x15-100mm.stl

Copies: 15

Filament: Brown, AMZ3D

River Case Brace Inside Wide

PN: rc197-river-case-brace-inside-wide-x9

2": rc197-river-case-brace-inside-wide-x9-50mm.stl

3": rc197-river-case-brace-inside-wide-x9-75mm.stl

4": rc197-river-case-brace-inside-wide-x9-100mm.stl

Copies: 9

Filament: Brown, AMZ3D

River Case Brace Inside Split

PN: rc198-river-case-brace-inside-split-x2

2": rc198-river-case-brace-inside-split-x2-50mm.stl

3": rc198-river-case-brace-inside-split-x2-75mm.stl

4": rc198-river-case-brace-inside-split-x2-100mm.stl

Copies: 2

Filament: Brown, AMZ3D

Assembly: River Case Lid, part 1

The following parts are organized by filament color. This makes file selection in the Slicer easier.

Once 3D printed, the parts are arranged as shown here.

This assembly shows the far left side of the lid.

Assembly: River Case Lid, part 2

This assembly shows the middle left side of the lid.

Assembly: River Case Lid, part 3

This assembly shows the middle right side of the lid.

Assembly: River Case Lid, part 4

This assembly shows the far right side of the lid.

River Case Lid Land 1

PN: rc201-river-case-lid-land-1

2": rc201-river-case-lid-land-1-50mm.stl

3": rc201-river-case-lid-land-1-75mm.stl

4": rc201-river-case-lid-land-1-100mm.stl

Filament: Yellow, Hatchbox

River Case Lid Land 5

PN: rc205-river-case-lid-land-5

2": rc205-river-case-lid-land-5-50mm.stl

3": rc205-river-case-lid-land-5-75mm.stl

4": rc205-river-case-lid-land-5-100mm.stl

Filament: Yellow, Hatchbox

River Case Lid Land 7

PN: rc207-river-case-lid-land-7

2": rc207-river-case-lid-land-7-50mm.stl

3": rc207-river-case-lid-land-7-75mm.stl

4": rc207-river-case-lid-land-7-100mm.stl

Filament: Yellow, Hatchbox

River Case Lid Land 9

PN: rc209-river-case-lid-land-9

2": rc209-river-case-lid-land-9-50mm.stl

3": rc209-river-case-lid-land-9-75mm.stl

4": rc209-river-case-lid-land-9-100mm.stl

Filament: Yellow, Hatchbox

River Case Lid Land 11

PN: rc211-river-case-lid-land-11

2": rc211-river-case-lid-land-11-50mm.stl

3": rc211-river-case-lid-land-11-75mm.stl

4": rc211-river-case-lid-land-11-100mm.stl

Filament: Yellow, Hatchbox

River Case Lid Land 13

PN: rc213-river-case-lid-land-13

2": rc213-river-case-lid-land-13-50mm.stl

3": rc213-river-case-lid-land-13-75mm.stl

4": rc213-river-case-lid-land-13-100mm.stl

Filament: Yellow, Hatchbox

River Case Lid Land 15

PN: rc215-river-case-lid-land-15

2": rc215-river-case-lid-land-15-50mm.stl

3": rc215-river-case-lid-land-15-75mm.stl

4": rc215-river-case-lid-land-15-100mm.stl

Filament: Yellow, Hatchbox

River Case Lid Land 17

PN: rc217-river-case-lid-land-17

2": rc217-river-case-lid-land-17-50mm.stl

3": rc217-river-case-lid-land-17-75mm.stl

4": rc217-river-case-lid-land-17-100mm.stl

Filament: Yellow, Hatchbox

River Case Lid Land 19

PN: rc219-river-case-lid-land-19

2": rc219-river-case-lid-land-19-50mm.stl

3": rc219-river-case-lid-land-19-75mm.stl

4": rc219-river-case-lid-land-19-100mm.stl

Filament: Yellow, Hatchbox

River Case Lid Land 21

PN: rc221-river-case-lid-land-21

2": rc221-river-case-lid-land-21-50mm.stl

3": rc221-river-case-lid-land-21-75mm.stl

4": rc221-river-case-lid-land-21-100mm.stl

Filament: Yellow, Hatchbox

River Case Lid Land 23

PN: rc223-river-case-lid-land-23

2": rc223-river-case-lid-land-23-50mm.stl

3": rc223-river-case-lid-land-23-75mm.stl

4": rc223-river-case-lid-land-23-100mm.stl

Filament: Yellow, Hatchbox

River Case Lid Land 25

PN: rc225-river-case-lid-land-25

2": rc225-river-case-lid-land-25-50mm.stl

3": rc225-river-case-lid-land-25-75mm.stl

4": rc225-river-case-lid-land-25-100mm.stl

Filament: Yellow, Hatchbox

River Case Lid Land 27

PN: rc227-river-case-lid-land-27

2": rc227-river-case-lid-land-27-50mm.stl

3": rc227-river-case-lid-land-27-75mm.stl

4": rc227-river-case-lid-land-27-100mm.stl

Filament: Yellow, Hatchbox

River Case Lid Land 29

PN: rc229-river-case-lid-land-29

2": rc229-river-case-lid-land-29-50mm.stl

3": rc229-river-case-lid-land-29-75mm.stl

4": rc229-river-case-lid-land-29-100mm.stl

Filament: Yellow, Hatchbox

River Case Lid Land 31

PN: rc231-river-case-lid-land-31

2": rc231-river-case-lid-land-31-50mm.stl

3": rc231-river-case-lid-land-31-75mm.stl

4": rc231-river-case-lid-land-31-100mm.stl

Filament: Yellow, Hatchbox

River Case Lid Land 33

PN: rc233-river-case-lid-land-33

2": rc233-river-case-lid-land-33-50mm.stl

3": rc233-river-case-lid-land-33-75mm.stl

4": rc233-river-case-lid-land-33-100mm.stl

Filament: Yellow, Hatchbox

River Case Lid Land 35

PN: rc235-river-case-lid-land-35

2": rc235-river-case-lid-land-35-50mm.stl

3": rc235-river-case-lid-land-35-75mm.stl

4": rc235-river-case-lid-land-35-100mm.stl

Filament: Yellow, Hatchbox

River Case Lid Land 37

PN: rc237-river-case-lid-land-37

2": rc237-river-case-lid-land-37-50mm.stl

3": rc237-river-case-lid-land-37-75mm.stl

4": rc237-river-case-lid-land-37-100mm.stl

Filament: Yellow, Hatchbox

River Case Lid Land 39

PN: rc239-river-case-lid-land-39

2": rc239-river-case-lid-land-39-50mm.stl

3": rc239-river-case-lid-land-39-75mm.stl

4": rc239-river-case-lid-land-39-100mm.stl

Filament: Yellow, Hatchbox

River Case Lid Land 41

PN: rc241-river-case-lid-land-41

2": rc241-river-case-lid-land-41-50mm.stl

3": rc241-river-case-lid-land-41-75mm.stl

4": rc241-river-case-lid-land-41-100mm.stl

Filament: Yellow, Hatchbox

River Case Lid Land 43

PN: rc243-river-case-lid-land-43

2": rc243-river-case-lid-land-43-50mm.stl

3": rc243-river-case-lid-land-43-75mm.stl

4": rc243-river-case-lid-land-43-100mm.stl

Filament: Yellow, Hatchbox

River Case Lid Land 45

PN: rc245-river-case-lid-land-45

2": rc245-river-case-lid-land-45-50mm.stl

3": rc245-river-case-lid-land-45-75mm.stl

4": rc245-river-case-lid-land-45-100mm.stl

Filament: Yellow, Hatchbox

River Case Lid Land 47

PN: rc247-river-case-lid-land-47

2": rc247-river-case-lid-land-47-50mm.stl

3": rc247-river-case-lid-land-47-75mm.stl

4": rc247-river-case-lid-land-47-100mm.stl

Filament: Yellow, Hatchbox

River Case Lid Land 49

PN: rc249-river-case-lid-land-49

2": rc249-river-case-lid-land-49-50mm.stl

3": rc249-river-case-lid-land-49-75mm.stl

4": rc249-river-case-lid-land-49-100mm.stl

Filament: Yellow, Hatchbox

River Case Lid Land 51

PN: rc251-river-case-lid-land-51

2": rc251-river-case-lid-land-51-50mm.stl

3": rc251-river-case-lid-land-51-75mm.stl

4": rc251-river-case-lid-land-51-100mm.stl

Filament: Yellow, Hatchbox

River Case Lid River 2

PN: rc302-river-case-lid-river-2

2": rc302-river-case-lid-river-2-50mm.stl

3": rc302-river-case-lid-river-2-75mm.stl

4": rc302-river-case-lid-river-2-100mm.stl

Filament: Yellow, Hatchbox

River Case Lid River 6

PN: rc306-river-case-lid-river-6

2": rc306-river-case-lid-river-6-50mm.stl

3": rc306-river-case-lid-river-6-75mm.stl

4": rc306-river-case-lid-river-6-100mm.stl

Filament: Yellow, Hatchbox

River Case Lid River 10

PN: rc310-river-case-lid-river-10

2": rc310-river-case-lid-river-10-50mm.stl

3": rc310-river-case-lid-river-10-75mm.stl

4": rc310-river-case-lid-river-10-100mm.stl

Filament: Yellow, Hatchbox

River Case Lid River 14

PN: rc314-river-case-lid-river-14

2": rc314-river-case-lid-river-14-50mm.stl

3": rc314-river-case-lid-river-14-75mm.stl

4": rc314-river-case-lid-river-14-100mm.stl

Filament: Yellow, Hatchbox

River Case Lid River 18

PN: rc318-river-case-lid-river-18

2": rc318-river-case-lid-river-18-50mm.stl

3": rc318-river-case-lid-river-18-75mm.stl

4": rc318-river-case-lid-river-18-100mm.stl

Filament: Yellow, Hatchbox

River Case Lid River 22

PN: rc322-river-case-lid-river-22

2": rc322-river-case-lid-river-22-50mm.stl

3": rc322-river-case-lid-river-22-75mm.stl

4": rc322-river-case-lid-river-22-100mm.stl

Filament: Yellow, Hatchbox

River Case Lid River 26

PN: rc326-river-case-lid-river-26

2": rc326-river-case-lid-river-26-50mm.stl

3": rc326-river-case-lid-river-26-75mm.stl

4": rc326-river-case-lid-river-26-100mm.stl

Filament: Yellow, Hatchbox

River Case Lid River 30

PN: rc330-river-case-lid-river-30

2": rc330-river-case-lid-river-30-50mm.stl

3": rc330-river-case-lid-river-30-75mm.stl

4": rc330-river-case-lid-river-30-100mm.stl

Filament: Yellow, Hatchbox

River Case Lid River 34

PN: rc334-river-case-lid-river-34

2": rc334-river-case-lid-river-34-50mm.stl

3": rc334-river-case-lid-river-34-75mm.stl

4": rc334-river-case-lid-river-34-100mm.stl

Filament: Yellow, Hatchbox

River Case Lid River 38

PN: rc338-river-case-lid-river-38

2": rc338-river-case-lid-river-38-50mm.stl

3": rc338-river-case-lid-river-38-75mm.stl

4": rc338-river-case-lid-river-38-100mm.stl

Filament: Yellow, Hatchbox

River Case Lid River 42

PN: rc342-river-case-lid-river-42

2": rc342-river-case-lid-river-42-50mm.stl

3": rc342-river-case-lid-river-42-75mm.stl

4": rc342-river-case-lid-river-42-100mm.stl

Filament: Yellow, Hatchbox

River Case Lid River 46

PN: rc346-river-case-lid-river-46

2": rc346-river-case-lid-river-46-50mm.stl

3": rc346-river-case-lid-river-46-75mm.stl

4": rc346-river-case-lid-river-46-100mm.stl

Filament: Yellow, Hatchbox

River Case Lid River 50

PN: rc350-river-case-lid-river-50

2": rc350-river-case-lid-river-50-50mm.stl

3": rc350-river-case-lid-river-50-75mm.stl

4": rc350-river-case-lid-river-50-100mm.stl

Filament: Yellow, Hatchbox

River Case Lid Trim

PN: rc391-river-case-lid-trim-x21

2": rc391-river-case-lid-trim-x21-50mm.stl

3": rc391-river-case-lid-trim-x21-75mm.stl

4": rc391-river-case-lid-trim-x21-100mm.stl

Copies: 21

Brim: recommended

Add Support in Slicer: required

Filament: Green, Hatchbox

River Case Lid Trim Short

PN: rc392-river-case-lid-trim-short

2": rc392-river-case-lid-trim-short-50mm.stl

3": rc392-river-case-lid-trim-short-75mm.stl

4": rc392-river-case-lid-trim-short-100mm.stl

Filament: Blue, Hatchbox Pantone Blue 072C

River Case Inlay Trim Tiny

PN: rc393-river-case-inlay-trim-tiny-x2

2": rc393-river-case-inlay-trim-tiny-x2-50mm.stl

3": rc393-river-case-inlay-trim-tiny-x2-75mm.stl

4": rc393-river-case-inlay-trim-tiny-x2-100mm.stl

Copies: 2

Brim: recommended

Add Support in Slicer: required

Filament: Bright Blue, AIO

River Case Lid Trim Corner

PN: rc395-river-case-lid-trim-corner

2": rc395-river-case-lid-trim-corner-50mm.stl

3": rc395-river-case-lid-trim-corner-75mm.stl

4": rc395-river-case-lid-trim-corner-100mm.stl

Brim: recommended

Add Support in Slicer: required

Filament: Green, Hatchbox

River Case Lid Trim Corner Cut 1

PN: rc396-river-case-lid-trim-corner-cut-1

2": rc396-river-case-lid-trim-corner-cut-1-50mm.stl

3": rc396-river-case-lid-trim-corner-cut-1-75mm.stl

4": rc396-river-case-lid-trim-corner-cut-1-100mm.stl

Brim: recommended

Add Support in Slicer: required

Filament: Green, Hatchbox

River Case Lid Trim Corner Cut 2

PN: rc397-river-case-lid-trim-corner-cut-2

2": rc397-river-case-lid-trim-corner-cut-2-50mm.stl

3": rc397-river-case-lid-trim-corner-cut-2-75mm.stl

4": rc397-river-case-lid-trim-corner-cut-2-100mm.stl

Brim: recommended

Add Support in Slicer: required

Filament: Green, Hatchbox

River Case Lid Trim Corner Short 1

PN: rc398-river-case-lid-trim-corner-short-1

2": rc398-river-case-lid-trim-corner-short-1-50mm.stl

3": rc398-river-case-lid-trim-corner-short-1-75mm.stl

4": rc398-river-case-lid-trim-corner-short-1-100mm.stl

Brim: recommended

Add Support in Slicer: required

Filament: Green, Hatchbox

River Case Lid Trim Corner Short 2

PN: rc399-river-case-lid-trim-corner-short-2

2": rc399-river-case-lid-trim-corner-short-2-50mm.stl

3": rc399-river-case-lid-trim-corner-short-2-75mm.stl

4": rc399-river-case-lid-trim-corner-short-2-100mm.stl

Brim: recommended

Add Support in Slicer: required

Filament: Green, Hatchbox

Assembly: River Case Lid, part 1

The following parts are organized by filament color. This makes file selection in the Slicer easier.

Once 3D printed, the parts are arranged as shown here.

This assembly shows the far left side of the inlays.

Assembly: River Case Lid, part 2

This assembly shows the middle left side of the inlays.

Assembly: River Case Lid, part 3

This assembly shows the middle right side of the inlays.

Assembly: River Case Lid, part 4

This assembly shows the far right side of the inlays.

River Case Inlay Land 1

PN: rc401-river-case-inlay-land-1

2": rc401-river-case-inlay-land-1-50mm.stl

3": rc401-river-case-inlay-land-1-75mm.stl

4": rc401-river-case-inlay-land-1-100mm.stl

Filament: Brown, AMZ3D

River Case Inlay Land 5

PN: rc405-river-case-inlay-land-5

2": rc405-river-case-inlay-land-5-50mm.stl

3": rc405-river-case-inlay-land-5-75mm.stl

4": rc405-river-case-inlay-land-5-100mm.stl

Filament: Brown, AMZ3D

River Case Inlay Land 7

PN: rc407-river-case-inlay-land-7

2": rc407-river-case-inlay-land-7-50mm.stl

3": rc407-river-case-inlay-land-7-75mm.stl

4": rc407-river-case-inlay-land-7-100mm.stl

Filament: Brown, AMZ3D

River Case Inlay Land 9

PN: rc409-river-case-inlay-land-9

2": rc409-river-case-inlay-land-9-50mm.stl

3": rc409-river-case-inlay-land-9-75mm.stl

4": rc409-river-case-inlay-land-9-100mm.stl

Filament: Brown, AMZ3D

River Case Inlay Land 11

PN: rc411-river-case-inlay-land-11

2": rc411-river-case-inlay-land-11-50mm.stl

3": rc411-river-case-inlay-land-11-75mm.stl

4": rc411-river-case-inlay-land-11-100mm.stl

Filament: Brown, AMZ3D

River Case Inlay Land 13

PN: rc413-river-case-inlay-land-13

2": rc413-river-case-inlay-land-13-50mm.stl

3": rc413-river-case-inlay-land-13-75mm.stl

4": rc413-river-case-inlay-land-13-100mm.stl

Filament: Brown, AMZ3D

River Case Inlay Land 15

PN: rc415-river-case-inlay-land-15

2": rc415-river-case-inlay-land-15-50mm.stl

3": rc415-river-case-inlay-land-15-75mm.stl

4": rc415-river-case-inlay-land-15-100mm.stl

Filament: Brown, AMZ3D

River Case Inlay Land 17

PN: rc417-river-case-inlay-land-17

2": rc417-river-case-inlay-land-17-50mm.stl

3": rc417-river-case-inlay-land-17-75mm.stl

4": rc417-river-case-inlay-land-17-100mm.stl

Filament: Brown, AMZ3D

River Case Inlay Land 19

PN: rc419-river-case-inlay-land-19

2": rc419-river-case-inlay-land-19-50mm.stl

3": rc419-river-case-inlay-land-19-75mm.stl

4": rc419-river-case-inlay-land-19-100mm.stl

Filament: Brown, AMZ3D

River Case Inlay Land 21

PN: rc421-river-case-inlay-land-21

2": rc421-river-case-inlay-land-21-50mm.stl

3": rc421-river-case-inlay-land-21-75mm.stl

4": rc421-river-case-inlay-land-21-100mm.stl

Filament: Brown, AMZ3D

River Case Inlay Land 23

PN: rc423-river-case-inlay-land-23

2": rc423-river-case-inlay-land-23-50mm.stl

3": rc423-river-case-inlay-land-23-75mm.stl

4": rc423-river-case-inlay-land-23-100mm.stl

Filament: Brown, AMZ3D

River Case Inlay Land 25

PN: rc425-river-case-inlay-land-25

2": rc425-river-case-inlay-land-25-50mm.stl

3": rc425-river-case-inlay-land-25-75mm.stl

4": rc425-river-case-inlay-land-25-100mm.stl

Filament: Brown, AMZ3D

River Case Inlay Land 27

PN: rc427-river-case-inlay-land-27

2": rc427-river-case-inlay-land-27-50mm.stl

3": rc427-river-case-inlay-land-27-75mm.stl

4": rc427-river-case-inlay-land-27-100mm.stl

Filament: Brown, AMZ3D

River Case Inlay Land 29

PN: rc429-river-case-inlay-land-29

2": rc429-river-case-inlay-land-29-50mm.stl

3": rc429-river-case-inlay-land-29-75mm.stl

4": rc429-river-case-inlay-land-29-100mm.stl

Filament: Brown, AMZ3D

River Case Inlay Land 31

PN: rc431-river-case-inlay-land-31

2": rc431-river-case-inlay-land-31-50mm.stl

3": rc431-river-case-inlay-land-31-75mm.stl

4": rc431-river-case-inlay-land-31-100mm.stl

Filament: Brown, AMZ3D

River Case Inlay Land 33

PN: rc433-river-case-inlay-land-33

2": rc433-river-case-inlay-land-33-50mm.stl

3": rc433-river-case-inlay-land-33-75mm.stl

4": rc433-river-case-inlay-land-33-100mm.stl

Filament: Brown, AMZ3D

River Case Inlay Land 35

PN: rc435-river-case-inlay-land-35

2": rc435-river-case-inlay-land-35-50mm.stl

3": rc435-river-case-inlay-land-35-75mm.stl

4": rc435-river-case-inlay-land-35-100mm.stl

Filament: Brown, AMZ3D

River Case Inlay Land 37

PN: rc437-river-case-inlay-land-37

2": rc437-river-case-inlay-land-37-50mm.stl

3": rc437-river-case-inlay-land-37-75mm.stl

4": rc437-river-case-inlay-land-37-100mm.stl

Filament: Brown, AMZ3D

River Case Inlay Land 39

PN: rc439-river-case-inlay-land-39

2": rc439-river-case-inlay-land-39-50mm.stl

3": rc439-river-case-inlay-land-39-75mm.stl

4": rc439-river-case-inlay-land-39-100mm.stl

Filament: Brown, AMZ3D

River Case Inlay Land 41

PN: rc441-river-case-inlay-land-41

2": rc441-river-case-inlay-land-41-50mm.stl

3": rc441-river-case-inlay-land-41-75mm.stl

4": rc441-river-case-inlay-land-41-100mm.stl

Filament: Brown, AMZ3D

River Case Inlay Land 43

PN: rc443-river-case-inlay-land-43

2": rc443-river-case-inlay-land-43-50mm.stl

3": rc443-river-case-inlay-land-43-75mm.stl

4": rc443-river-case-inlay-land-43-100mm.stl

Filament: Brown, AMZ3D

River Case Inlay Land 45

PN: rc445-river-case-inlay-land-45

2": rc445-river-case-inlay-land-45-50mm.stl

3": rc445-river-case-inlay-land-45-75mm.stl

4": rc445-river-case-inlay-land-45-100mm.stl

Filament: Brown, AMZ3D

River Case Inlay Land 47

PN: rc447-river-case-inlay-land-47

2": rc447-river-case-inlay-land-47-50mm.stl

3": rc447-river-case-inlay-land-47-75mm.stl

4": rc447-river-case-inlay-land-47-100mm.stl

Filament: Brown, AMZ3D

River Case Inlay Land 49

PN: rc449-river-case-inlay-land-49

2": rc449-river-case-inlay-land-49-50mm.stl

3": rc449-river-case-inlay-land-49-75mm.stl

4": rc449-river-case-inlay-land-49-100mm.stl

Filament: Brown, AMZ3D

River Case Inlay Land 51

PN: rc451-river-case-inlay-land-51

2": rc451-river-case-inlay-land-51-50mm.stl

3": rc451-river-case-inlay-land-51-75mm.stl

4": rc451-river-case-inlay-land-51-100mm.stl

Filament: Brown, AMZ3D

River Case Inlay Land Leg 1

PN: rc491-river-case-inlay-land-leg-1-x2

2": rc491-river-case-inlay-land-leg-1-x2-50mm.stl

3": rc491-river-case-inlay-land-leg-1-x2-75mm.stl

4": rc491-river-case-inlay-land-leg-1-x2-100mm.stl

Copies: 2

Filament: Green, Hatchbox

River Case Inlay Land Leg 2

PN: rc492-river-case-inlay-land-leg-2-x2

2": rc492-river-case-inlay-land-leg-2-x2-50mm.stl

3": rc492-river-case-inlay-land-leg-2-x2-75mm.stl

4": rc492-river-case-inlay-land-leg-2-x2-100mm.stl

Copies: 2

Filament: Green, Hatchbox

River Case Inlay Land Tee

PN: rc493-river-case-inlay-land-tee-x23

2": rc493-river-case-inlay-land-tee-x23-50mm.stl

3": rc493-river-case-inlay-land-tee-x23-75mm.stl

4": rc493-river-case-inlay-land-tee-x23-100mm.stl

Copies: 23

Filament: Green, Hatchbox

River Case Inlay River 2

PN: rc502-river-case-inlay-river-2

2": rc502-river-case-inlay-river-2-50mm.stl

3": rc502-river-case-inlay-river-2-75mm.stl

4": rc502-river-case-inlay-river-2-100mm.stl

Filament: Blue, Hatchbox Pantone Blue 072C

River Case Inlay River 6

PN: rc506-river-case-inlay-river-6

2": rc506-river-case-inlay-river-6-50mm.stl

3": rc506-river-case-inlay-river-6-75mm.stl

4": rc506-river-case-inlay-river-6-100mm.stl

Filament: Blue, Hatchbox Pantone Blue 072C

River Case Inlay River 10

PN: rc510-river-case-inlay-river-10

2": rc510-river-case-inlay-river-10-50mm.stl

3": rc510-river-case-inlay-river-10-75mm.stl

4": rc510-river-case-inlay-river-10-100mm.stl

Filament: Blue, Hatchbox Pantone Blue 072C

River Case Inlay River 14

PN: rc514-river-case-inlay-river-14

2": rc514-river-case-inlay-river-14-50mm.stl

3": rc514-river-case-inlay-river-14-75mm.stl

4": rc514-river-case-inlay-river-14-100mm.stl

Filament: Blue, Hatchbox Pantone Blue 072C

River Case Inlay River 18

PN: rc518-river-case-inlay-river-18

2": rc518-river-case-inlay-river-18-50mm.stl

3": rc518-river-case-inlay-river-18-75mm.stl

4": rc518-river-case-inlay-river-18-100mm.stl

Filament: Blue, Hatchbox Pantone Blue 072C

River Case Inlay River 22

PN: rc522-river-case-inlay-river-22

2": rc522-river-case-inlay-river-22-50mm.stl

3": rc522-river-case-inlay-river-22-75mm.stl

4": rc522-river-case-inlay-river-22-100mm.stl

Filament: Blue, Hatchbox Pantone Blue 072C

River Case Inlay River 26

PN: rc526-river-case-inlay-river-26

2": rc526-river-case-inlay-river-26-50mm.stl

3": rc526-river-case-inlay-river-26-75mm.stl

4": rc526-river-case-inlay-river-26-100mm.stl

Filament: Blue, Hatchbox Pantone Blue 072C

River Case Inlay River 30

PN: rc530-river-case-inlay-river-30

2": rc530-river-case-inlay-river-30-50mm.stl

3": rc530-river-case-inlay-river-30-75mm.stl

4": rc530-river-case-inlay-river-30-100mm.stl

Filament: Blue, Hatchbox Pantone Blue 072C

River Case Inlay River 34

PN: rc534-river-case-inlay-river-34

2": rc534-river-case-inlay-river-34-50mm.stl

3": rc534-river-case-inlay-river-34-75mm.stl

4": rc534-river-case-inlay-river-34-100mm.stl

Filament: Blue, Hatchbox Pantone Blue 072C

River Case Inlay River 38

PN: rc538-river-case-inlay-river-38

2": rc538-river-case-inlay-river-38-50mm.stl

3": rc538-river-case-inlay-river-38-75mm.stl

4": rc538-river-case-inlay-river-38-100mm.stl

Filament: Blue, Hatchbox Pantone Blue 072C

River Case Inlay River 42

PN: rc542-river-case-inlay-river-42

2": rc542-river-case-inlay-river-42-50mm.stl

3": rc542-river-case-inlay-river-42-75mm.stl

4": rc542-river-case-inlay-river-42-100mm.stl

Filament: Blue, Hatchbox Pantone Blue 072C

River Case Inlay River 46

PN: rc546-river-case-inlay-river-46

2": rc546-river-case-inlay-river-46-50mm.stl

3": rc546-river-case-inlay-river-46-75mm.stl

4": rc546-river-case-inlay-river-46-100mm.stl

Filament: Blue, Hatchbox Pantone Blue 072C

River Case Inlay River 50

PN: rc550-river-case-inlay-river-50

2": rc550-river-case-inlay-river-50-50mm.stl

3": rc550-river-case-inlay-river-50-75mm.stl

4": rc550-river-case-inlay-river-50-100mm.stl

Filament: Blue, Hatchbox Pantone Blue 072C

River Case Inlay River 54

PN: rc554-river-case-inlay-river-54

2": rc554-river-case-inlay-river-54-50mm.stl

3": rc554-river-case-inlay-river-54-75mm.stl

4": rc554-river-case-inlay-river-54-100mm.stl

Filament: Blue, Hatchbox Pantone Blue 072C

River Case Inlay River Corner

PN: rc591-river-case-inlay-river-corner-x2

2": rc591-river-case-inlay-river-corner-x2-50mm.stl

3": rc591-river-case-inlay-river-corner-x2-75mm.stl

4": rc591-river-case-inlay-river-corner-x2-100mm.stl

Copies: 2

Filament: Bright Blue, AIO

River Case Inlay River Edge

PN: rc592-river-case-inlay-river-edge-x24

2": rc592-river-case-inlay-river-edge-x24-50mm.stl

3": rc592-river-case-inlay-river-edge-x24-75mm.stl

4": rc592-river-case-inlay-river-edge-x24-100mm.stl

Copies: 24

Filament: Bright Blue, AIO

River Case Inlay River Short

PN: rc593-river-case-inlay-river-short-x2

2": rc593-river-case-inlay-river-short-x2-50mm.stl

3": rc593-river-case-inlay-river-short-x2-75mm.stl

4": rc593-river-case-inlay-river-short-x2-100mm.stl

Copies: 2

Filament: Bright Blue, AIO

Assembly: River Case Top

This assembly shows all of the bases for the plant models that sit atop this case.

This is 2 long rows that are on each side of the river. The shallower pitched side is towards the river. All bases have an embosed top that sits right, which must match the cell on which it sits.

There is an embossed bottom that causes precise alignment.

River Case Mound 1

PN: rc601-river-case-mound-1

2": rc601-river-case-mound-1-50mm.stl

3": rc601-river-case-mound-1-75mm.stl

4": rc601-river-case-mound-1-100mm.stl

Filament: Brown, AMZ3D

River Case Mound 5

PN: rc605-river-case-mound-5

2": rc605-river-case-mound-5-50mm.stl

3": rc605-river-case-mound-5-75mm.stl

4": rc605-river-case-mound-5-100mm.stl

Filament: Brown, AMZ3D

River Case Mound 7

PN: rc607-river-case-mound-7

2": rc607-river-case-mound-7-50mm.stl

3": rc607-river-case-mound-7-75mm.stl

4": rc607-river-case-mound-7-100mm.stl

Filament: Brown, AMZ3D

River Case Mound 9

PN: rc609-river-case-mound-9

2": rc609-river-case-mound-9-50mm.stl

3": rc609-river-case-mound-9-75mm.stl

4": rc609-river-case-mound-9-100mm.stl

Filament: Brown, AMZ3D

River Case Mound 11

PN: rc611-river-case-mound-11

2": rc611-river-case-mound-11-50mm.stl

3": rc611-river-case-mound-11-75mm.stl

4": rc611-river-case-mound-11-100mm.stl

Filament: Brown, AMZ3D

River Case Mound 13

PN: rc613-river-case-mound-13

2": rc613-river-case-mound-13-50mm.stl

3": rc613-river-case-mound-13-75mm.stl

4": rc613-river-case-mound-13-100mm.stl

Filament: Brown, AMZ3D

River Case Mound 15

PN: rc615-river-case-mound-15

2": rc615-river-case-mound-15-50mm.stl

3": rc615-river-case-mound-15-75mm.stl

4": rc615-river-case-mound-15-100mm.stl

Filament: Brown, AMZ3D

River Case Mound 17

PN: rc617-river-case-mound-17

2": rc617-river-case-mound-17-50mm.stl

3": rc617-river-case-mound-17-75mm.stl

4": rc617-river-case-mound-17-100mm.stl

Filament: Brown, AMZ3D

River Case Mound 19

PN: rc619-river-case-mound-19

2": rc619-river-case-mound-19-50mm.stl

3": rc619-river-case-mound-19-75mm.stl

4": rc619-river-case-mound-19-100mm.stl

Filament: Brown, AMZ3D

River Case Mound 21

PN: rc621-river-case-mound-21

2": rc621-river-case-mound-21-50mm.stl

3": rc621-river-case-mound-21-75mm.stl

4": rc621-river-case-mound-21-100mm.stl

Filament: Brown, AMZ3D

River Case Mound 23

PN: rc623-river-case-mound-23

2": rc623-river-case-mound-23-50mm.stl

3": rc623-river-case-mound-23-75mm.stl

4": rc623-river-case-mound-23-100mm.stl

Filament: Brown, AMZ3D

River Case Mound 25

PN: rc625-river-case-mound-25

2": rc625-river-case-mound-25-50mm.stl

3": rc625-river-case-mound-25-75mm.stl

4": rc625-river-case-mound-25-100mm.stl

Filament: Brown, AMZ3D

River Case Mound 27

PN: rc627-river-case-mound-27

2": rc627-river-case-mound-27-50mm.stl

3": rc627-river-case-mound-27-75mm.stl

4": rc627-river-case-mound-27-100mm.stl

Filament: Brown, AMZ3D

River Case Mound 29

PN: rc629-river-case-mound-29

2": rc629-river-case-mound-29-50mm.stl

3": rc629-river-case-mound-29-75mm.stl

4": rc629-river-case-mound-29-100mm.stl

Filament: Brown, AMZ3D

River Case Mound 31

PN: rc631-river-case-mound-31

2": rc631-river-case-mound-31-50mm.stl

3": rc631-river-case-mound-31-75mm.stl

4": rc631-river-case-mound-31-100mm.stl

Filament: Brown, AMZ3D

River Case Mound 33

PN: rc633-river-case-mound-33

2": rc633-river-case-mound-33-50mm.stl

3": rc633-river-case-mound-33-75mm.stl

4": rc633-river-case-mound-33-100mm.stl

Filament: Brown, AMZ3D

River Case Mound 35

PN: rc635-river-case-mound-35

2": rc635-river-case-mound-35-50mm.stl

3": rc635-river-case-mound-35-75mm.stl

4": rc635-river-case-mound-35-100mm.stl

Filament: Brown, AMZ3D

River Case Mound 37

PN: rc637-river-case-mound-37

2": rc637-river-case-mound-37-50mm.stl

3": rc637-river-case-mound-37-75mm.stl

4": rc637-river-case-mound-37-100mm.stl

Filament: Brown, AMZ3D

River Case Mound 39

PN: rc639-river-case-mound-39

2": rc639-river-case-mound-39-50mm.stl

3": rc639-river-case-mound-39-75mm.stl

4": rc639-river-case-mound-39-100mm.stl

Filament: Brown, AMZ3D

River Case Mound 41

PN: rc641-river-case-mound-41

2": rc641-river-case-mound-41-50mm.stl

3": rc641-river-case-mound-41-75mm.stl

4": rc641-river-case-mound-41-100mm.stl

Filament: Brown, AMZ3D

River Case Mound 43

PN: rc643-river-case-mound-43

2": rc643-river-case-mound-43-50mm.stl

3": rc643-river-case-mound-43-75mm.stl

4": rc643-river-case-mound-43-100mm.stl

Filament: Brown, AMZ3D

River Case Mound 45

PN: rc645-river-case-mound-45

2": rc645-river-case-mound-45-50mm.stl

3": rc645-river-case-mound-45-75mm.stl

4": rc645-river-case-mound-45-100mm.stl

Filament: Brown, AMZ3D

River Case Mound 47

PN: rc647-river-case-mound-47

2": rc647-river-case-mound-47-50mm.stl

3": rc647-river-case-mound-47-75mm.stl

4": rc647-river-case-mound-47-100mm.stl

Filament: Brown, AMZ3D

River Case Mound 49

PN: rc649-river-case-mound-49

2": rc649-river-case-mound-49-50mm.stl

3": rc649-river-case-mound-49-75mm.stl

4": rc649-river-case-mound-49-100mm.stl

Filament: Brown, AMZ3D

River Case Mound 51

PN: rc651-river-case-mound-51

2": rc651-river-case-mound-51-50mm.stl

3": rc651-river-case-mound-51-75mm.stl

4": rc651-river-case-mound-51-100mm.stl

Filament: Brown, AMZ3D

River Case Stand 1

PN: rc701-river-case-stand-1

2": rc701-river-case-stand-1-50mm.stl

3": rc701-river-case-stand-1-75mm.stl

4": rc701-river-case-stand-1-100mm.stl

Filament: Brown, AMZ3D

Stand only, 3D model shown for reference.

River Case Stand 5

PN: rc705-river-case-stand-5

2": rc705-river-case-stand-5-50mm.stl

3": rc705-river-case-stand-5-75mm.stl

4": rc705-river-case-stand-5-100mm.stl

Filament: Brown, AMZ3D

Stand only, 3D model shown for reference.

River Case Stand 7

PN: rc707-river-case-stand-7

2": rc707-river-case-stand-7-50mm.stl

3": rc707-river-case-stand-7-75mm.stl

4": rc707-river-case-stand-7-100mm.stl

Filament: Brown, AMZ3D

Stand only, 3D model shown for reference.

River Case Stand 9

PN: rc709-river-case-stand-9

2": rc709-river-case-stand-9-50mm.stl

3": rc709-river-case-stand-9-75mm.stl

4": rc709-river-case-stand-9-100mm.stl

Filament: Brown, AMZ3D

Stand only, 3D model shown for reference.

River Case Stand 11

PN: rc711-river-case-stand-11

2": rc711-river-case-stand-11-50mm.stl

3": rc711-river-case-stand-11-75mm.stl

4": rc711-river-case-stand-11-100mm.stl

Filament: Brown, AMZ3D

Stand only, 3D model shown for reference.

River Case Stand 13

PN: rc713-river-case-stand-13

2": rc713-river-case-stand-13-50mm.stl

3": rc713-river-case-stand-13-75mm.stl

4": rc713-river-case-stand-13-100mm.stl

Filament: Brown, AMZ3D

Stand only, 3D model shown for reference.

River Case Stand 15

PN: rc715-river-case-stand-15

2": rc715-river-case-stand-15-50mm.stl

3": rc715-river-case-stand-15-75mm.stl

4": rc715-river-case-stand-15-100mm.stl

Filament: Brown, AMZ3D

Stand only, 3D model shown for reference.

River Case Stand 17

PN: rc717-river-case-stand-17

2": rc717-river-case-stand-17-50mm.stl

3": rc717-river-case-stand-17-75mm.stl

4": rc717-river-case-stand-17-100mm.stl

Filament: Brown, AMZ3D

Stand only, 3D model shown for reference.

River Case Stand 19

PN: rc719-river-case-stand-19

2": rc719-river-case-stand-19-50mm.stl

3": rc719-river-case-stand-19-75mm.stl

4": rc719-river-case-stand-19-100mm.stl

Filament: Brown, AMZ3D

Stand only, 3D model shown for reference.

River Case Stand 21

PN: rc721-river-case-stand-21

2": rc721-river-case-stand-21-50mm.stl

3": rc721-river-case-stand-21-75mm.stl

4": rc721-river-case-stand-21-100mm.stl

Filament: Brown, AMZ3D

Stand only, 3D model shown for reference.

River Case Stand 23

PN: rc723-river-case-stand-23

2": rc723-river-case-stand-23-50mm.stl

3": rc723-river-case-stand-23-75mm.stl

4": rc723-river-case-stand-23-100mm.stl

Filament: Brown, AMZ3D

Stand only, 3D model shown for reference.

River Case Stand 25

PN: rc725-river-case-stand-25

2": rc725-river-case-stand-25-50mm.stl

3": rc725-river-case-stand-25-75mm.stl

4": rc725-river-case-stand-25-100mm.stl

Filament: Brown, AMZ3D

Stand only, 3D model shown for reference.

River Case Stand 27

PN: rc727-river-case-stand-27

2": rc727-river-case-stand-27-50mm.stl

3": rc727-river-case-stand-27-75mm.stl

4": rc727-river-case-stand-27-100mm.stl

Filament: Brown, AMZ3D

Stand only, 3D model shown for reference.

River Case Stand 29

PN: rc729-river-case-stand-29

2": rc729-river-case-stand-29-50mm.stl

3": rc729-river-case-stand-29-75mm.stl

4": rc729-river-case-stand-29-100mm.stl

Filament: Brown, AMZ3D

Stand only, 3D model shown for reference.

River Case Stand 31

PN: rc731-river-case-stand-31

2": rc731-river-case-stand-31-50mm.stl

3": rc731-river-case-stand-31-75mm.stl

4": rc731-river-case-stand-31-100mm.stl

Filament: Brown, AMZ3D

Stand only, 3D model shown for reference.

River Case Stand 33

PN: rc733-river-case-stand-33

2": rc733-river-case-stand-33-50mm.stl

3": rc733-river-case-stand-33-75mm.stl

4": rc733-river-case-stand-33-100mm.stl

Filament: Brown, AMZ3D

Stand only, 3D model shown for reference.

River Case Stand 35

PN: rc735-river-case-stand-35

2": rc735-river-case-stand-35-50mm.stl

3": rc735-river-case-stand-35-75mm.stl

4": rc735-river-case-stand-35-100mm.stl

Filament: Brown, AMZ3D

Stand only, 3D model shown for reference.

River Case Stand 37

PN: rc737-river-case-stand-37

2": rc737-river-case-stand-37-50mm.stl

3": rc737-river-case-stand-37-75mm.stl

4": rc737-river-case-stand-37-100mm.stl

Filament: Brown, AMZ3D

Stand only, 3D model shown for reference.

River Case Stand 39

PN: rc739-river-case-stand-39

2": rc739-river-case-stand-39-50mm.stl

3": rc739-river-case-stand-39-75mm.stl

4": rc739-river-case-stand-39-100mm.stl

Filament: Brown, AMZ3D

Stand only, 3D model shown for reference.

River Case Stand 41

PN: rc741-river-case-stand-41

2": rc741-river-case-stand-41-50mm.stl

3": rc741-river-case-stand-41-75mm.stl

4": rc741-river-case-stand-41-100mm.stl

Filament: Brown, AMZ3D

Stand only, 3D model shown for reference.

River Case Stand 43

PN: rc743-river-case-stand-43

2": rc743-river-case-stand-43-50mm.stl

3": rc743-river-case-stand-43-75mm.stl

4": rc743-river-case-stand-43-100mm.stl

Filament: Brown, AMZ3D

Stand only, 3D model shown for reference.

River Case Stand 45

PN: rc745-river-case-stand-45

2": rc745-river-case-stand-45-50mm.stl

3": rc745-river-case-stand-45-75mm.stl

4": rc745-river-case-stand-45-100mm.stl

Filament: Brown, AMZ3D

Stand only, 3D model shown for reference.

River Case Stand 47

PN: rc747-river-case-stand-47

2": rc747-river-case-stand-47-50mm.stl

3": rc747-river-case-stand-47-75mm.stl

4": rc747-river-case-stand-47-100mm.stl

Filament: Brown, AMZ3D

Stand only, 3D model shown for reference.

River Case Stand 49

PN: rc749-river-case-stand-49

2": rc749-river-case-stand-49-50mm.stl

3": rc749-river-case-stand-49-75mm.stl

4": rc749-river-case-stand-49-100mm.stl

Filament: Brown, AMZ3D

Stand only, 3D model shown for reference.

River Case Stand 51

PN: rc751-river-case-stand-51

2": rc751-river-case-stand-51-50mm.stl

3": rc751-river-case-stand-51-75mm.stl

4": rc751-river-case-stand-51-100mm.stl

Filament: Brown, AMZ3D

Stand only, 3D model shown for reference.

Stats

Part Numbers: 245

Part Count: 411

Optional Part Numbers: 0

Optional Part Count: 0