Paleo Bill of Materials

Ezekiel Reaper

This series provides all the parts to build a reaper. This is one of the skeletons from the Book of Ezekiel.

Full Series Downloads

2": er-50mm.tgz, 3": er-75mm.tgz, 4": er-100mm.tgz

Assembly: Ezekiel Sower Bottom

The bottom of the reaper is usually assembled 1st, as shown here.

4 parts are combined for this assembly, er010-ezekiel-reaper-earth, er020-ezekiel-reaper-legs, er030-ezekiel-reaper-grill-left, er040-ezekiel-reaper-grill-right

Ezekiel Reaper Earth

PN: er010-ezekiel-reaper-earth

2": er010-ezekiel-reaper-earth-50mm.stl

3": er010-ezekiel-reaper-earth-75mm.stl

4": er010-ezekiel-reaper-earth-100mm.stl

Add Support in Slicer: recommended

Filament: White, Hatchbox

Support is recommended to hold up the bottom edge of the wheel. Some printers and scales do not always require. Raising the lift height of the nozzle may help instead.

Ezekiel Reaper Earth Padded

PN: er011-ezekiel-reaper-earth-padded

2": er011-ezekiel-reaper-earth-padded-50mm.stl

3": er011-ezekiel-reaper-earth-padded-75mm.stl

4": er011-ezekiel-reaper-earth-padded-100mm.stl

Add Support in Slicer: recommended

Filament: White, Hatchbox

This optional part includes padding intended to help with bed adhesion. Use if your printer risks dislodging the part from the bed while printing.

Support is recommended to hold up the bottom edge of the wheel. Some printers and scales do not always require. Raising the lift height of the nozzle may help instead.

Ezekiel Reaper Legs

PN: er020-ezekiel-reaper-legs

2": er020-ezekiel-reaper-legs-50mm.stl

3": er020-ezekiel-reaper-legs-75mm.stl

4": er020-ezekiel-reaper-legs-100mm.stl

Add Support in Slicer: recommended

Filament: White, Hatchbox

Support is recommended to hold up the bottom edge of the wheel. Some printers and scales do not always require. Raising the lift height of the nozzle may help instead.

Ezekiel Reaper Legs Padded

PN: er021-ezekiel-reaper-legs-padded

2": er021-ezekiel-reaper-legs-padded-50mm.stl

3": er021-ezekiel-reaper-legs-padded-75mm.stl

4": er021-ezekiel-reaper-legs-padded-100mm.stl

Add Support in Slicer: recommended

Filament: White, Hatchbox

This optional part includes padding intended to help with bed adhesion. Use if your printer risks dislodging the part from the bed while printing.

Support is recommended to hold up the bottom edge of the wheel. Some printers and scales do not always require. Raising the lift height of the nozzle may help instead.

Ezekiel Reaper Grill Left

PN: er030-ezekiel-reaper-grill-left

2": er030-ezekiel-reaper-grill-left-50mm.stl

3": er030-ezekiel-reaper-grill-left-75mm.stl

4": er030-ezekiel-reaper-grill-left-100mm.stl

Filament: White, Hatchbox

Ezekiel Reaper Grill Right

PN: er040-ezekiel-reaper-grill-right

2": er040-ezekiel-reaper-grill-right-50mm.stl

3": er040-ezekiel-reaper-grill-right-75mm.stl

4": er040-ezekiel-reaper-grill-right-100mm.stl

Filament: White, Hatchbox

Assembly: Ezekiel Sower Body

The top of the reaper is usually assembled last, as shown here.

There are 2 ways to print this assembly.

The easiest uses 2 parts: er210-ezekiel-reaper-body-front and es220-ezekiel-reaper-body-back. These only require 2 prints, but may not fit on available printer bed in sizes larger that 2 inches.

Alternatively, there are 8 specific parts that handle front and back for each of the head, arms and torso. These optional parts always fit a standard 3D printer bed. Those parts follow here next.

Ezekiel Reaper Torso Front

PN: er050-ezekiel-reaper-torso-front

2": er050-ezekiel-reaper-torso-front-50mm.stl

3": er050-ezekiel-reaper-torso-front-75mm.stl

4": er050-ezekiel-reaper-torso-front-100mm.stl

Add Support in Slicer: recommended

Filament: White, Hatchbox

This optional part is used when the "body" part below is too large for the bed of the printer.

Ezekiel Reaper Torso Back

PN: er060-ezekiel-reaper-torso-back

2": er060-ezekiel-reaper-torso-back-50mm.stl

3": er060-ezekiel-reaper-torso-back-75mm.stl

4": er060-ezekiel-reaper-torso-back-100mm.stl

Add Support in Slicer: required

Filament: White, Hatchbox

This optional part is used when the "body" part below is too large for the printer.

Ezekiel Reaper Face Front

PN: er070-ezekiel-reaper-face-front

2": er070-ezekiel-reaper-face-front-50mm.stl

3": er070-ezekiel-reaper-face-front-75mm.stl

4": er070-ezekiel-reaper-face-front-100mm.stl

Add Support in Slicer: required

Filament: White, Hatchbox

This optional part is used when the "body" part below is too large for the printer.

Ezekiel Reaper Face Back

PN: er080-ezekiel-reaper-face-back

2": er080-ezekiel-reaper-face-back-50mm.stl

3": er080-ezekiel-reaper-face-back-75mm.stl

4": er080-ezekiel-reaper-face-back-100mm.stl

Add Support in Slicer: required

Filament: White, Hatchbox

This optional part is used when the "body" part below is too large for the printer.

Ezekiel Reaper Hand Right Front

PN: er090-ezekiel-reaper-hand-right-front

2": er090-ezekiel-reaper-hand-right-front-50mm.stl

3": er090-ezekiel-reaper-hand-right-front-75mm.stl

4": er090-ezekiel-reaper-hand-right-front-100mm.stl

Filament: White, Hatchbox

This optional part is used when the "body" part below is too large for the printer.

Ezekiel Reaper Hand Right Back

PN: er100-ezekiel-reaper-hand-right-back

2": er100-ezekiel-reaper-hand-right-back-50mm.stl

3": er100-ezekiel-reaper-hand-right-back-75mm.stl

4": er100-ezekiel-reaper-hand-right-back-100mm.stl

Filament: White, Hatchbox

This optional part is used when the "body" part below is too large for the printer.

Ezekiel Reaper Eye

PN: er130-ezekiel-reaper-eye-x6

2": er130-ezekiel-reaper-eye-x6-50mm.stl

3": er130-ezekiel-reaper-eye-x6-75mm.stl

4": er130-ezekiel-reaper-eye-x6-100mm.stl

Copies: 6

Filament: White, Hatchbox

This part is used for the eyes and the brain. 2 copies are needed for each of the 3 locations.

This part has crossing monofilament line.

Ezekiel Reaper Seed

PN: er140-ezekiel-reaper-seed-x4

2": er140-ezekiel-reaper-seed-x4-50mm.stl

3": er140-ezekiel-reaper-seed-x4-75mm.stl

4": er140-ezekiel-reaper-seed-x4-100mm.stl

Copies: 4

Filament: White, Hatchbox

This part is used for the seeds in the left hand. 2 copies are needed for each of the 2 locations.

This part has a single pass-through monofilament line.

Ezekiel Reaper Body Front

PN: er150-ezekiel-reaper-body-front

2": er150-ezekiel-reaper-body-front-50mm.stl

3": er150-ezekiel-reaper-body-front-75mm.stl

4": er150-ezekiel-reaper-body-front-100mm.stl

Add Support in Slicer: required

Filament: White, Hatchbox

This part combines the torso, arms and head. This is easier to print and assemble, provided the part will fit on your printer bed.

Ezekiel Reaper Body Back

PN: er160-ezekiel-reaper-body-back

2": er160-ezekiel-reaper-body-back-50mm.stl

3": er160-ezekiel-reaper-body-back-75mm.stl

4": er160-ezekiel-reaper-body-back-100mm.stl

Add Support in Slicer: required

Filament: White, Hatchbox

This part combines the torso, arms and head. This is easier to print and assemble, provided the part will fit on your printer bed.

Ezekiel Reaper Jig

PN: er500-ezekiel-reaper-jig

2": er500-ezekiel-reaper-jig-50mm.stl

3": er500-ezekiel-reaper-jig-75mm.stl

4": er500-ezekiel-reaper-jig-100mm.stl

Filament: Use any scrap filament

Use this to tension the monofilament used for the eyes, brain and seeds before gluing. Use 2 small spring clamps to hold the line to the edge of the jig until glue is dry.

Once dry, clip excess monofilament line, then glue the 2 sides together.

Stats

Part Numbers: 8

Part Count: 16

Optional Part Numbers: 9

Optional Part Count: 9