Paleo Bill of Materials

City Things

This series builds the city thing mdels.

When finished, these parts are placed inside the City Case.

Full Series Downloads

2": ct-50mm.tgz, 3": ct-75mm.tgz, 4": ct-100mm.tgz

City Thing Dot

PN: ct001-city-thing-dot-x8

2": ct001-city-thing-dot-x8-50mm.stl

3": ct001-city-thing-dot-x8-75mm.stl

4": ct001-city-thing-dot-x8-100mm.stl

Copies: 8

Add Support in Slicer: required

Filament: Yellow, Hatchbox

This part includes a hole for a single monofilament line. You may want to print spares.

City Thing Dot 2

PN: ct002-city-thing-dot-2-x10

2": ct002-city-thing-dot-2-x10-50mm.stl

3": ct002-city-thing-dot-2-x10-75mm.stl

4": ct002-city-thing-dot-2-x10-100mm.stl

Copies: 10

Add Support in Slicer: required

Filament: Yellow, Hatchbox

This part includes a holes for 2 monofilament lines. You may want to print spares.

Assembly: Wa Thing: Sundial

The following parts assemble the Wa thing, a Sundial.

City Thing Wa Ring

PN: ct010-city-thing-wa-ring-x2

2": ct010-city-thing-wa-ring-x2-50mm.stl

3": ct010-city-thing-wa-ring-x2-75mm.stl

4": ct010-city-thing-wa-ring-x2-100mm.stl

Copies: 2

Add Support in Slicer: required

Filament: Yellow, Hatchbox

Use ct019-city-thing-wa-jig for assembly.

It is important to ensure the pivot points in the 2 copies of this part are aligned.

City Thing Wa Gnomon

PN: ct011-city-thing-wa-gnomon

2": ct011-city-thing-wa-gnomon-50mm.stl

3": ct011-city-thing-wa-gnomon-75mm.stl

4": ct011-city-thing-wa-gnomon-100mm.stl

Add Support in Slicer: required

Filament: Yellow, Hatchbox

City Thing Wa Gnomon Mirror

PN: ct012-city-thing-wa-gnomon-mirror

2": ct012-city-thing-wa-gnomon-mirror-50mm.stl

3": ct012-city-thing-wa-gnomon-mirror-75mm.stl

4": ct012-city-thing-wa-gnomon-mirror-100mm.stl

Filament: Yellow, Hatchbox

City Thing Wa Jig

PN: ct019-city-thing-wa-jig

2": ct019-city-thing-wa-jig-50mm.stl

3": ct019-city-thing-wa-jig-75mm.stl

4": ct019-city-thing-wa-jig-100mm.stl

Filament: Use any scrap filament

Requires gluing, but produces the best final finish.

Assembly: Ba Thing: Tent Frame

The following parts assembly into a tent frame.

City Thing Ba Frame

PN: ct020-city-thing-ba-frame

2": ct020-city-thing-ba-frame-50mm.stl

3": ct020-city-thing-ba-frame-75mm.stl

4": ct020-city-thing-ba-frame-100mm.stl

Add Support in Slicer: required

Filament: Yellow, Hatchbox

City Thing Ba Frame Mirror

PN: ct021-city-thing-ba-frame-mirror

2": ct021-city-thing-ba-frame-mirror-50mm.stl

3": ct021-city-thing-ba-frame-mirror-75mm.stl

4": ct021-city-thing-ba-frame-mirror-100mm.stl

Add Support in Slicer: required

Filament: Yellow, Hatchbox

City Thing Ba Peg

PN: ct022-city-thing-ba-peg-x6

2": ct022-city-thing-ba-peg-x6-50mm.stl

3": ct022-city-thing-ba-peg-x6-75mm.stl

4": ct022-city-thing-ba-peg-x6-100mm.stl

Copies: 6

Filament: Yellow, Hatchbox

This peg has a single monofilament line through the middle.

Mark the line with a marker, then put drop of glue on the line, then slide the parts together over the glue.

This part for the 3 sides without a splice.

City Thing Ba Peg 2

PN: ct024-city-thing-ba-peg-2-x2

2": ct024-city-thing-ba-peg-2-x2-50mm.stl

3": ct024-city-thing-ba-peg-2-x2-75mm.stl

4": ct024-city-thing-ba-peg-2-x2-100mm.stl

Copies: 2

Filament: Yellow, Hatchbox

This part has a through-hole that is twice the size of the previous part. The 2 monofilament lines at the splice can be slid through before gluin. Like the previous parts, slide these peices together over a drop of glue on the splice

City Thing Ba Jig

PN: ct029-city-thing-ba-jig

2": ct029-city-thing-ba-jig-50mm.stl

3": ct029-city-thing-ba-jig-75mm.stl

4": ct029-city-thing-ba-jig-100mm.stl

Filament: Use any scrap filament

Contains braces to control the splice point for the monofilament line that goes through the various tent pegs. Use small spring loaded clamps to hold the line in place until dry.

There are alignment bumps for centering pegs.

Assembly: Ge Thing: Sythe

The following parts assemble into a Sythe.

City Thing Ge 1

PN: ct031-city-thing-ge-1

2": ct031-city-thing-ge-1-50mm.stl

3": ct031-city-thing-ge-1-75mm.stl

4": ct031-city-thing-ge-1-100mm.stl

Filament: Yellow, Hatchbox

City Thing Ge 2

PN: ct032-city-thing-ge-2

2": ct032-city-thing-ge-2-50mm.stl

3": ct032-city-thing-ge-2-75mm.stl

4": ct032-city-thing-ge-2-100mm.stl

Filament: Yellow, Hatchbox

City Thing Ge Jig

PN: ct039-city-thing-ge-jig

2": ct039-city-thing-ge-jig-50mm.stl

3": ct039-city-thing-ge-jig-75mm.stl

4": ct039-city-thing-ge-jig-100mm.stl

Filament: Use any scrap filament

Assembly: Du Thing: Bag

The following parts assemble into a Bag or Purse.

City Thing Du 1

PN: ct041-city-thing-du-1-x2

2": ct041-city-thing-du-1-x2-50mm.stl

3": ct041-city-thing-du-1-x2-75mm.stl

4": ct041-city-thing-du-1-x2-100mm.stl

Copies: 2

Filament: Yellow, Hatchbox

City Thing Du 2

PN: ct042-city-thing-du-2-x2

2": ct042-city-thing-du-2-x2-50mm.stl

3": ct042-city-thing-du-2-x2-75mm.stl

4": ct042-city-thing-du-2-x2-100mm.stl

Copies: 2

Filament: Yellow, Hatchbox

Assembly: Fe Thing: Rake

The following parts assemble into a Rake.

City Thing Fe 1

PN: ct051-city-thing-fe-1

2": ct051-city-thing-fe-1-50mm.stl

3": ct051-city-thing-fe-1-75mm.stl

4": ct051-city-thing-fe-1-100mm.stl

Filament: Yellow, Hatchbox

City Thing Fe 2

PN: ct052-city-thing-fe-2

2": ct052-city-thing-fe-2-50mm.stl

3": ct052-city-thing-fe-2-75mm.stl

4": ct052-city-thing-fe-2-100mm.stl

Filament: Yellow, Hatchbox

Assembly: Ve Thing: Tent Peg

The following parts assemble into a Tent Peg.

City Thing Ve

PN: ct061-city-thing-ve-x2

2": ct061-city-thing-ve-x2-50mm.stl

3": ct061-city-thing-ve-x2-75mm.stl

4": ct061-city-thing-ve-x2-100mm.stl

Copies: 2

Add Support in Slicer: required

Filament: Yellow, Hatchbox

Assembly: Jo Thing: Balance

The following parts assemble into a Balance.

City Thing Jo Arm

PN: ct070-city-thing-jo-arm-x2

2": ct070-city-thing-jo-arm-x2-50mm.stl

3": ct070-city-thing-jo-arm-x2-75mm.stl

4": ct070-city-thing-jo-arm-x2-100mm.stl

Copies: 2

Filament: Yellow, Hatchbox

City Thing Jo Frame 1

PN: ct071-city-thing-jo-frame-1

2": ct071-city-thing-jo-frame-1-50mm.stl

3": ct071-city-thing-jo-frame-1-75mm.stl

4": ct071-city-thing-jo-frame-1-100mm.stl

Filament: Yellow, Hatchbox

City Thing Jo Frame 2

PN: ct072-city-thing-jo-frame-2-x2

2": ct072-city-thing-jo-frame-2-x2-50mm.stl

3": ct072-city-thing-jo-frame-2-x2-75mm.stl

4": ct072-city-thing-jo-frame-2-x2-100mm.stl

Copies: 2

Filament: Yellow, Hatchbox

Assembly: Ha Thing: Corral

The following parts assemble into a Corral.

City Thing Ha

PN: ct081-city-thing-ha-x2

2": ct081-city-thing-ha-x2-50mm.stl

3": ct081-city-thing-ha-x2-75mm.stl

4": ct081-city-thing-ha-x2-100mm.stl

Copies: 2

Add Support in Slicer: required

Filament: Yellow, Hatchbox

Assembly: The Thing: Wheel

The following parts assemble into a Wheel.

City Thing The Outside

PN: ct091-city-thing-the-outside-x2

2": ct091-city-thing-the-outside-x2-50mm.stl

3": ct091-city-thing-the-outside-x2-75mm.stl

4": ct091-city-thing-the-outside-x2-100mm.stl

Copies: 2

Filament: Yellow, Hatchbox

City Thing The Rim

PN: ct092-city-thing-the-rim-x2

2": ct092-city-thing-the-rim-x2-50mm.stl

3": ct092-city-thing-the-rim-x2-75mm.stl

4": ct092-city-thing-the-rim-x2-100mm.stl

Copies: 2

Filament: Yellow, Hatchbox

City Thing The Axel

PN: ct094-city-thing-the-axel-x2

2": ct094-city-thing-the-axel-x2-50mm.stl

3": ct094-city-thing-the-axel-x2-75mm.stl

4": ct094-city-thing-the-axel-x2-100mm.stl

Copies: 2

Filament: Yellow, Hatchbox

City Thing The Spokes

PN: ct095-city-thing-the-spokes-x4

2": ct095-city-thing-the-spokes-x4-50mm.stl

3": ct095-city-thing-the-spokes-x4-75mm.stl

4": ct095-city-thing-the-spokes-x4-100mm.stl

Copies: 4

Filament: Clear, IC3D

City Thing The Jig 1

PN: ct098-city-thing-the-jig-1

2": ct098-city-thing-the-jig-1-50mm.stl

3": ct098-city-thing-the-jig-1-75mm.stl

4": ct098-city-thing-the-jig-1-100mm.stl

Filament: Use any scrap filament

This jig is used to glue the 2 sides of the spokes together.

It is also used to glue the 2 sides of the axel together.

Once dry the spoke halves are glued to the axel.

Once all the spokes are dry, the wheel is glued to the exposed spoke ends.

City Thing The Jig 2

PN: ct099-city-thing-the-jig-2

2": ct099-city-thing-the-jig-2-50mm.stl

3": ct099-city-thing-the-jig-2-75mm.stl

4": ct099-city-thing-the-jig-2-100mm.stl

Filament: Use any scrap filament

Once the wheel, spokes and axel are assembled, they are captured in the outside frame.

This jig is used to assemble that frame to the axel.

This step requires the tips of the axel to NOT touch glue. The wheel should spin freely when done.

Assembly: Yo Thing: Hand

The following parts assemble into a Hand.

City Thing Yo 1

PN: ct101-city-thing-yo-1

2": ct101-city-thing-yo-1-50mm.stl

3": ct101-city-thing-yo-1-75mm.stl

4": ct101-city-thing-yo-1-100mm.stl

Filament: Yellow, Hatchbox

City Thing Yo 2

PN: ct102-city-thing-yo-2

2": ct102-city-thing-yo-2-50mm.stl

3": ct102-city-thing-yo-2-75mm.stl

4": ct102-city-thing-yo-2-100mm.stl

Filament: Yellow, Hatchbox

City Thing Yo Jig

PN: ct109-city-thing-yo-jig

2": ct109-city-thing-yo-jig-50mm.stl

3": ct109-city-thing-yo-jig-75mm.stl

4": ct109-city-thing-yo-jig-100mm.stl

Filament: Use any scrap filament

This jig helps to align all the fingers at the same time.

Assembly: Ku Thing: Sprout

The following parts assemble into a Sprout.

City Thing Ku

PN: ct111-city-thing-ku-x2

2": ct111-city-thing-ku-x2-50mm.stl

3": ct111-city-thing-ku-x2-75mm.stl

4": ct111-city-thing-ku-x2-100mm.stl

Copies: 2

Add Support in Slicer: optional

Filament: Yellow, Hatchbox

Assembly: Lu Thing: Staff

The following parts assemble into a Staff.

City Thing Lu 1

PN: ct121-city-thing-lu-1

2": ct121-city-thing-lu-1-50mm.stl

3": ct121-city-thing-lu-1-75mm.stl

4": ct121-city-thing-lu-1-100mm.stl

Filament: Yellow, Hatchbox

City Thing Lu 2

PN: ct122-city-thing-lu-2

2": ct122-city-thing-lu-2-50mm.stl

3": ct122-city-thing-lu-2-75mm.stl

4": ct122-city-thing-lu-2-100mm.stl

Filament: Yellow, Hatchbox

Assembly: Mo Thing: Water

The following parts assemble into Water.

City Thing Mo 1

PN: ct131-city-thing-mo-1

2": ct131-city-thing-mo-1-50mm.stl

3": ct131-city-thing-mo-1-75mm.stl

4": ct131-city-thing-mo-1-100mm.stl

Add Support in Slicer: recommended

Filament: Yellow, Hatchbox

City Thing Mo 2

PN: ct132-city-thing-mo-2

2": ct132-city-thing-mo-2-50mm.stl

3": ct132-city-thing-mo-2-75mm.stl

4": ct132-city-thing-mo-2-100mm.stl

Add Support in Slicer: recommended

Filament: Yellow, Hatchbox

Assembly: Ne Thing: Seed

The following parts assemble into a Seed.

City Thing Ne

PN: ct141-city-thing-ne-x2

2": ct141-city-thing-ne-x2-50mm.stl

3": ct141-city-thing-ne-x2-75mm.stl

4": ct141-city-thing-ne-x2-100mm.stl

Copies: 2

Filament: Yellow, Hatchbox

City Thing Ne Jig

PN: ct149-city-thing-ne-jig

2": ct149-city-thing-ne-jig-50mm.stl

3": ct149-city-thing-ne-jig-75mm.stl

4": ct149-city-thing-ne-jig-100mm.stl

Filament: Use any scrap filament

Assembly: Sa Thing: Post

The following parts assemble into a Post.

City Thing Sa

PN: ct151-city-thing-sa-x2

2": ct151-city-thing-sa-x2-50mm.stl

3": ct151-city-thing-sa-x2-75mm.stl

4": ct151-city-thing-sa-x2-100mm.stl

Copies: 2

Filament: Yellow, Hatchbox

City Thing Sa Jig

PN: ct159-city-thing-sa-jig

2": ct159-city-thing-sa-jig-50mm.stl

3": ct159-city-thing-sa-jig-75mm.stl

4": ct159-city-thing-sa-jig-100mm.stl

Filament: Use any scrap filament

Assembly: Oo Thing: Eye

The following parts assemble into an Eye.

City Thing Oo

PN: ct161-city-thing-oo-x2

2": ct161-city-thing-oo-x2-50mm.stl

3": ct161-city-thing-oo-x2-75mm.stl

4": ct161-city-thing-oo-x2-100mm.stl

Copies: 2

Filament: Yellow, Hatchbox

Assembly: Pe Thing: Ear

The following parts assemble into an Ear.

City Thing Pe 1

PN: ct171-city-thing-pe-1

2": ct171-city-thing-pe-1-50mm.stl

3": ct171-city-thing-pe-1-75mm.stl

4": ct171-city-thing-pe-1-100mm.stl

Filament: Yellow, Hatchbox

City Thing Pe 2

PN: ct172-city-thing-pe-2

2": ct172-city-thing-pe-2-50mm.stl

3": ct172-city-thing-pe-2-75mm.stl

4": ct172-city-thing-pe-2-100mm.stl

Filament: Yellow, Hatchbox

Assembly: Ze Thing: Buckle

The following parts assemble into a Buckle.

City Thing Ze Hook 1

PN: ct181-city-thing-ze-hook-1

2": ct181-city-thing-ze-hook-1-50mm.stl

3": ct181-city-thing-ze-hook-1-75mm.stl

4": ct181-city-thing-ze-hook-1-100mm.stl

Filament: Yellow, Hatchbox

City Thing Ze Hook 2

PN: ct182-city-thing-ze-hook-2

2": ct182-city-thing-ze-hook-2-50mm.stl

3": ct182-city-thing-ze-hook-2-75mm.stl

4": ct182-city-thing-ze-hook-2-100mm.stl

Filament: Yellow, Hatchbox

City Thing Ze Ring

PN: ct183-city-thing-ze-ring-x2

2": ct183-city-thing-ze-ring-x2-50mm.stl

3": ct183-city-thing-ze-ring-x2-75mm.stl

4": ct183-city-thing-ze-ring-x2-100mm.stl

Copies: 2

Filament: Yellow, Hatchbox

Assembly: Qu Thing: Brain

The following parts assemble into a Brain.

City Thing Qu

PN: ct191-city-thing-qu-x2

2": ct191-city-thing-qu-x2-50mm.stl

3": ct191-city-thing-qu-x2-75mm.stl

4": ct191-city-thing-qu-x2-100mm.stl

Copies: 2

Add Support in Slicer: required

Filament: Yellow, Hatchbox

Assembly: Re Thing: Head

The following parts assemble into a Head.

City Thing Re 1

PN: ct201-city-thing-re-1

2": ct201-city-thing-re-1-50mm.stl

3": ct201-city-thing-re-1-75mm.stl

4": ct201-city-thing-re-1-100mm.stl

Filament: Yellow, Hatchbox

City Thing Re 2

PN: ct202-city-thing-re-2

2": ct202-city-thing-re-2-50mm.stl

3": ct202-city-thing-re-2-75mm.stl

4": ct202-city-thing-re-2-100mm.stl

Add Support in Slicer: required

Filament: Yellow, Hatchbox

City Thing Re Jig

PN: ct209-city-thing-re-jig

2": ct209-city-thing-re-jig-50mm.stl

3": ct209-city-thing-re-jig-75mm.stl

4": ct209-city-thing-re-jig-100mm.stl

Filament: Use any scrap filament

Assembly: Sha Thing: Tooth

The following parts assemble into a Tooth.

City Thing Sha

PN: ct211-city-thing-sha-x2

2": ct211-city-thing-sha-x2-50mm.stl

3": ct211-city-thing-sha-x2-75mm.stl

4": ct211-city-thing-sha-x2-100mm.stl

Copies: 2

Add Support in Slicer: required

Filament: Yellow, Hatchbox

Assembly: Du Thing: Knit Cloth

The following parts assemble into Knit Cloth.

City Thing Ta

PN: ct221-city-thing-ta-x2

2": ct221-city-thing-ta-x2-50mm.stl

3": ct221-city-thing-ta-x2-75mm.stl

4": ct221-city-thing-ta-x2-100mm.stl

Copies: 2

Filament: Yellow, Hatchbox

Assembly: Quad Thing: End of Paragraph

The following parts assemble into an End of Paragraph.

City Thing Quad Frame

PN: ct241-city-thing-quad-frame-x2

2": ct241-city-thing-quad-frame-x2-50mm.stl

3": ct241-city-thing-quad-frame-x2-75mm.stl

4": ct241-city-thing-quad-frame-x2-100mm.stl

Copies: 2

Filament: Clear, IC3D

Assembly: Colon Thing: End-of-Sentence

The following parts assemble into End of Sentence.

City Thing Colon Frame

PN: ct251-city-thing-colon-frame-x2

2": ct251-city-thing-colon-frame-x2-50mm.stl

3": ct251-city-thing-colon-frame-x2-75mm.stl

4": ct251-city-thing-colon-frame-x2-100mm.stl

Copies: 2

Filament: Clear, IC3D

Assembly: Dot Thing: End-of-Word

The following parts assemble into an End of Word.

City Thing Dot Frame

PN: ct261-city-thing-dot-frame-x2

2": ct261-city-thing-dot-frame-x2-50mm.stl

3": ct261-city-thing-dot-frame-x2-75mm.stl

4": ct261-city-thing-dot-frame-x2-100mm.stl

Copies: 2

Filament: Clear, IC3D

Stats

Part Numbers: 46

Part Count: 91

Optional Part Numbers: 10

Optional Part Count: 11